NextSDS Logo
Safety Data Sheet EN

neodisher Septo Plus

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
neodisher Septo Plus

Regulatory Identifiers

CAS Number
N/A

Identified Uses

disinfectants PC35 Washing and cleaning products (including solvent based products)

Manufacturers & Suppliers

Chemische Fabrik Dr. Weigert GmbH & Co. KG logo

Chemische Fabrik Dr. Weigert GmbH & Co. KG

manufacturer

Mühlenhagen 85, D-20539 Hamburg

+49 40 789 60 0

http://www.drweigert.com

Emergency Contacts

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS09 - Environmental hazard

GHS09

Hazard Statements

H314 Causes severe skin burns and eye damage.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
isotridecanol, ethoxylated 69011-36-5 1 - 10% Yes
fatty alcohols, alkoxylated 120313-48-6 1 - 10% Yes
N,N-didecyl-N-methyl-poly(oxyethyl)ammonium propionate EC: 619-057-3 94667-33-1 10 - 25% Yes
ethanediol EC: 203-473-3 107-21-1 1 - 10% Yes
propan-2-ol EC: 200-661-7 67-63-0 1 - 10% Yes
2-(2-butoxyethoxy)ethanol EC: 203-961-6 112-34-5 1 - 10% Yes

Complete text of hazard statements in chapter 16

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Ensure supply of fresh air. When spray fog inhaled, seek medical aid.

Skin contact

After contact with skin, wash immediately with plenty of water. Take medical treatment.

Eye contact

In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Summon a doctor immediately.

Ingestion

If swallowed, seek medical advice immediately and show this container or label. Rinse mouth thoroughly with water. Let plenty of water be drunk in small gulps. Do not induce vomiting.

Immediate Medical Attention

In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Chemical resistant gloves. For Permanent hand contact: Appropriate Material neoprene, Material thickness >= 0,65 mm, Breakthrough time - 480 min. Appropriate Material nitrile, Material thickness >= 0,4 mm, Breakthrough time - 480 min. Appropriate Material butyl, Material thickness >= 0,7 mm, Breakthrough time - 480 min. For Short-term hand contact: Appropriate Material nitrile, Material thickness >= 0,11 mm. Hand protection must comply with EN 374.

Eyes

Safety glasses with side protection shield; Eye protection must comply with EN 166.

Respiratory

If workplace limits are exceeded, a respiratory protection approved for this particular job must be worn. Particle filter P2

Skin/Body

Clothing as usual in the chemical industry. Protective shoes

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid, clear
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless to yellowish
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
not determined
Ph
appr. 6,5
Melting Point
not determined
Boiling Point
not determined
Flash Point
54 C
Freezing Point
not determined
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
not determined
Vapor Pressure
not determined
Vapor Density
---
Relative Density
1,00 g/cm
Bulk Density
---
Density
1,00 g/cm
Flammability
Not applicable
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
not determined
Solubility
not determined
Partition Coefficient
not determined
Solubility In Water
miscible in all proportions
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
< 50 mPa.s
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1903
Shipping Name
DISINFECTANT, LIQUID, CORROSIVE, N.O.S.
Transport Class
8
Packing Group
III
ADR

See Sections 6 to 8

IMDG

See Sections 6 to 8

IATA

See Sections 6 to 8

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for neodisher Septo Plus?

The signal word is danger.

What is the physical form of neodisher Septo Plus?

neodisher Septo Plus is a liquid, clear with colourless to yellowish color. It has characteristic odor.

What is the solubility of neodisher Septo Plus?

not determined

What is neodisher Septo Plus used for?

disinfectants PC35 Washing and cleaning products (including solvent based products)

What are the hazard statements for neodisher Septo Plus?

This substance has 2 hazard statements:

  • H314: Causes severe skin burns and eye damage.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of neodisher Septo Plus?

The melting point is not determined and the boiling point is not determined.