ALTIS EM 2

Move to fresh air.

Symptoms: Not classified. Inhalation of vapours in high concentration may cause irritation of respiratory system.

Remove contaminated clothing and shoes. Wash skin with soap and water. Wash contaminated clothing before reuse. High pressure jets may cause skin damage. Take victim immediately to hospital.

Symptoms: Not classified. May produce an allergic reaction. High pressure injection of the products under the skin may have very serious consequences even though no symptom or injury may be apparent.

Rinse thoroughly with plenty of water, also under the eyelids.

Symptoms: Not classified.

Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician or poison control centre immediately.

Symptoms: Not classified. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea.

Carbon dioxide (CO₂). ABC powder. Foam. Water spray or fog.

Do not use a solid water stream as it may scatter and spread fire.

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. These may be highly dangerous if inhaled in confined spaces or at high concentration.

Cool containers / tanks with water spray.

Do not touch or walk through spilled material. Contaminated surfaces will be extremely slippery. Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition.

Do not allow material to contaminate ground water system. Try to prevent the material from entering drains or water courses.

collect with non-combustable absorbent material and place in container for disposal according to local / national regulations. Collect free product with suitable mechanical means. Keep in suitable, closed containers for disposal.

Materials: non-combustable absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

When using, do not eat, drink or smoke. For personal protection see section 8. Use only in well-ventilated areas. Do not breathe vapours or spray mist. Avoid contact with skin, eyes and clothing.

Keep away from food, drink and animal feedingstuffs. Keep in a bunded area. Keep container tightly closed. Preferably keep in the original container. Otherwise, reproduce all the statutory information from the labels onto the new container. Do not remove the hazard labels of the containers (even if they are empty). Protect from frost, heat and sunlight. Protect from moisture.

Ensure the application of strict rules of hygiene by the personnel exposed to the risk of contact with the product. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Do not use abrasives, solvents or fuels. Do not dry hands with rags that have been contaminated with product. Do not put product contaminated rags into workwear pockets.

Take precautionary measures against static discharges. Ground/bond containers, tanks and transfer/receiving equipment.

Apply technical measures to comply with the occupational exposure limits. When working in confined spaces (tanks, containers, etc.), ensure that there is a supply of air suitable for breathing and wear the recommended equipment.

Hydrocarbon-proof gloves: Fluorinated rubber, Nitrile rubber. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves.

If splashes are likely to occur, wear.. Safety glasses with side-shields.

None under normal use conditions. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Respirator with combination filter for vapour/particulate (EN 14387). Type A/P1. The use of breathing apparatus must comply strictly with the manufacturer's instructions and the regulations governing their choices and uses.

Wear suitable protective clothing. Protective shoes or boots. Long sleeved clothing.

The product should not be allowed to enter drains, water courses or the soil.

Stable under recommended storage conditions.

No information available.

None under normal processing.

Heat (temperatures above flash point), sparks, ignition points, flames, static electricity.

Strong oxidising agents.

None under normal use. Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot.

Should not be released into the environment. Dispose of in accordance with the European Directives on waste and hazardous waste. Dispose of in accordance with local regulations.

Dispose of in accordance with the European Directives on waste and hazardous waste. Dispose of in accordance with local regulations.