EX2-2

Remove patient to fresh air - move out of dangerous area. Victim should rest in a warm place. If symptoms develop and persist, seek medical attention.

Symptoms: Coughing, sneezing, nasal discharge, labored breathing.

Immediately remove contaminated clothing. Areas of the body that have come into contact with the product must be rinsed with water. Immediately obtain professional medical help! Wash contaminated clothes and shoes before reuse.

Symptoms: Harmful. Causes severe burns. Skin burns: Signs/symptoms may include localised redness, swelling, itching, dryness, blistering. May cause sensitisation by skin contact (itching, redness, rashes).

Immediately flush eyes with running water, keeping eyelids apart. Consult a physician immediately! Continue rinsing. If the patient is wearing contact lenses, remove them immediately.

Symptoms: Causes burns: signs/symptoms include corneal damage, burns, pain, lacrimation, corrosive effects, partial or complete lost of sight.

Do not induce vomiting! Rinse mouth with water and drink a glass of water by sips! Do not drink milk or alcoholic beverages. Immediately consult a doctor. Show the physician the safety data sheet or label. Never give anything by mouth to an unconscious person.

Symptoms: Harmful to health. If ingested, causes severe burns of the mouth and throat, as well as perforation of the esophagus and stomach. May cause nausea/vomiting and diarrhea.

Carbon dioxide. Dry chemical powder. Water spray. Alcohol resistant foam. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Full water jet.

In case of a fire toxic gases can be generated; do not inhale gases/smoke.

In case of fire or heating do not breathe fumes/vapours. Cool containers at risk with water spray. If possible remove containers from endangered area. No action shall be taken involving any personal risk or without suitable training.

Ensure adequate ventilation. Prevent access to unprotected personnel. Do not breathe vapour or mist. Avoid contact with skin, eyes and clothing. Avoid contact with spilled product or contaminated surfaces.

Do not allow product to reach water/drains/sewage systems or permeable soil.

Absorb product (with inert material), collect it in special container and dispose it to a licensed hazardous-waste disposal contractor. Clean contaminated area with plenty of water. Retain and dispose of contaminated wash water.

Materials: inert material

Use good personal hygiene practices – wash hands at breaks and when done working with material. Do not eat, drink or smoke while working. Avoid contact with skin, eyes and clothes. Product is not for eating – do not ingest! Do not breathe vapours/mist. Wear suitable protective equipment; see Section 8. Remove contaminated clothes and wash them before reuse. Obtain special instructions before use. To avoid spills during handling keep bottle on a metal tray.

Keep in a cool, dry and well ventilated place. Keep away from food, drink and animal feeding stuffs. Keep in tightly closed container. Store between: 2 - 40 °C Do not store in unlabelled containers. Keep away from incompatible products (see section 10).

Use good personal hygiene practices – wash hands at breaks and when done working with material. Do not eat, drink or smoke while working. Avoid contact with skin, eyes and clothes. Product is not for eating – do not ingest! Do not breathe vapours/mist. Wear suitable protective equipment; see Section 8. Remove contaminated clothes and wash them before reuse. Obtain special instructions before use.

The usual measures for preventive fire protection.

Provide good ventilation and local exhaust in areas with increased concentration.

Protective gloves (EN 374). The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Observe the manufacturer's instructions regarding the use, storage, maintenance and replacement of gloves. In case of damage or at the first signs of wear and tear, change the gloves immediately. Appropriate materials: Butyl rubber (Thickness: /, Penetration Time: >480 min, BS EN ISO 374), nitrile rubber (Thickness: /, Penetration Time: <480 min, BS EN ISO 374).

Wear tight fitting protective goggles and/or face protection (EN 166).

Wear suitable protective breathing mask (EN 136) with filter A2-P2 (EN 14387). For dust/gas/ vapor concentrations above the applicable filter limit, in case of oxygen concentrations below 17% or in vague conditions, autonomous self-contained breathing apparatus should be used, according to standard BS EN 137, BS EN 138.

Cotton protective clothing and shoes that cover the entire foot (BS EN ISO 20345:2022). At high risk of skin exposure chemical suits (BS EN ISO 6530:2005) and boots may be required (BS EN ISO 20345:2022).

Implement measures to protect the environment. Avoid discharge into drains and surface waters. Prevent release into in the environment.

Product is stable under normal conditions of use, recommended handling and storage conditions.

No information.

The product is stable under recommended storage and handling conditions.

No special precautions required. Consider the directions for use and storage.

Strong oxidising agents. Strong acids. Strong bases.

Under normal use conditions no hazardous decomposition products are expected. In case of fire/explosion vapours/gases that pose a health hazard are released. Nitrogen oxides (NOx). Carbon dioxide; Carbon monoxide.

deliver it to authorised collector/remover/transformer of hazardous waste.

Disposal must be made according to official regulations: deliver it to authorised collector/remover/transformer of hazardous waste.