Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML
- Product Code
- 000731
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category: Flux agents for casting; Process category: PROC7 Industrial spraying, PROC11 Non industrial spraying; Application of the substance / the mixture: Preparation
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
European Aerosols B.V.
manufacturer
Wolframweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
NPIS National Poisons Information Centre
+44 0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propan-2-ol EC: 200-661-7 | 67-63-0 | 10 - 12.5% | Yes |
| 2-butoxyethanol EC: 203-905-0 | 111-76-2 | 5 - 10% | Yes |
| anionic surfactants, perfumes (Terpinolene) | --- | 5% | No |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves Butyl rubber, BR The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min Butyl acetate: 60 min Ethyl acetate: 170 min Xylene: 42 min Butyl rubber gloves with a thickness of 0.4 mm are solvent resistant for 42- 480 minutes. As protective measure, we recommend that users and responsible persons for work safety assume solvent resistance length of 42 minutes. Considering the data in section 3 of this SDS, one can assume longer resistance length in particular cases.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A2/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not regulated
- Shipping Name
- not regulated
- Transport Class
- not regulated
- Packing Group
- not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML?
The signal word is warning.
What is the physical form of MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML?
MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML is a fluid appearing as fluid with clear color. It has alcohol-like odor.
What is the solubility of MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML?
Not miscible or difficult to mix.
What is MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML used for?
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category: Flux agents for casting; Process category: PROC7 Industrial spraying, PROC11 Non industrial spraying; Application of the substance / the mixture: Preparation
What are the hazard statements for MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML?
The melting point is Undetermined. and the boiling point is 82 C (179.6 F).