Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP INDUSTRIAL CLEANER 500 ML
- Product Code
- 090509
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category: PC35 Washing and cleaning products (including solvent based products); PC24 Lubricants, greases, release products; Process category: PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture: Cleaning agent/ Cleaner
Manufacturers & Suppliers
MOTIP DUPLI B.V.
manufacturer
Wolfraamweg 2 NL- 8471 XC Wolvega The Netherlands
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
NPIS National Poisons Information Centre
+44 0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane EC: 921-024-6 | --- | 50 - 75% | Yes |
| 2-Propanone EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| Cycllohexanon EC: 203-539-1 | 107-98-2 | 5 - 10% | Yes |
| Koolstofdioxide (vast) EC: 204-696-9 | 124-38-9 | 5 - 10% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Medical Treatment
No further relevant information available.
Related Substances
Similar chemicals with comparable safety profiles
MOTIP CONTACT CLEANER 500 ML
---
MOTIP CAR CARE GLASS CLEANER TRIGGER 500 ML
---
MOTIP CYCLING CHAIN CLEANER GEL 400 ML
---
MOTIP CUT & DRILL LUBRICANT 500 ML
---
MOTIP PTFE SPRAY 500 ML
---
MOTIP PTFE SPRAY 500 ML
---
MOTIP ANTI CORROSION PRIMER RED 500 ML
---
MOTIP COPPER SPRAY 500 ML
---
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves Material of gloves: Butyl rubber, BR The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. Butyl rubber gloves with a thickness of 0.4 mm are solvent resistant for 42- 480 minutes. As protective measure, we recommend that users and responsible persons for work safety assume solvent resistance length of 42 minutes. Considering the data in section 3 of this SDS, one can assume longer resistance length in particular cases.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A2/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS, ENVIRONMENTALLY HAZARDOUS
- Transport Class
- 2.1
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases.
Warning: Gases.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP INDUSTRIAL CLEANER 500 ML?
The signal word is danger.
What is the physical form of MOTIP INDUSTRIAL CLEANER 500 ML?
MOTIP INDUSTRIAL CLEANER 500 ML is a aerosol with clear color. It has solvent-like odor.
What is the solubility of MOTIP INDUSTRIAL CLEANER 500 ML?
Not miscible or difficult to mix.
What is MOTIP INDUSTRIAL CLEANER 500 ML used for?
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category: PC35 Washing and cleaning products (including solvent based products); PC24 Lubricants, greases, release products; Process category: PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture: Cleaning agent/ Cleaner
What are the hazard statements for MOTIP INDUSTRIAL CLEANER 500 ML?
This substance has 6 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of MOTIP INDUSTRIAL CLEANER 500 ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..