NextSDS Logo
Safety Data Sheet EN

MOLYKOTE® 44 Medium High Temperature Grease

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOLYKOTE® 44 Medium High Temperature Grease

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricants and lubricant additives

Manufacturers & Suppliers

S

SPECIALTY ELECTRONIC MATERIALS UK LIMITED

distributor

KINGS COURT, LONDON ROAD, STEVENAGE, England, SG1 2NG, UNITED KINGDOM

00800-3876-6838

D

DuPont Specialty Products GmbH & Co. KG

manufacturer

Emergency Contacts

Emergency Contact

+(44)-870-8200418

24-Hour

Emergency Contact

+(44)-870-8200418

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Aquatic Chronic Cat. 3 H412

GHS Pictograms

Hazard Statements

H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P501 Dispose of contents/ container to an approved waste disposal plant.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Silicone grease.

Chemical Name CAS Number Concentration Hazardous
octamethylcyclotetrasiloxane EC: 209-136-7 556-67-2 0.025 - 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air; if effects occur, consult a physician.

Skin contact

Wash off with plenty of water.

Eye contact

Flush eyes thoroughly with water for several minutes. Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a physician, preferably an ophthalmologist.

Ingestion

If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

If swallowed, seek medical attention. If effects occur (inhalation, eye contact), consult a physician. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient.

Medical Treatment

Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use local exhaust ventilation, or other engineering controls to maintain airborne levels below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, general ventilation should be sufficient for most operations.

Hands

Use chemical resistant gloves classified under Standard EN374: Protective gloves against chemicals and micro-organisms. NOTICE: The selection of a specific glove for a particular application and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection), potential body reactions to glove materials, as well as the instructions/specifications provided by the glove supplier.

Eyes

Use safety glasses (with side shields). Safety glasses (with side shields) should be consistent with EN 166 or equivalent.

Respiratory

Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, wear respiratory protection when adverse effects, such as respiratory irritation or discomfort have been experienced, or where indicated by your risk assessment process.

Skin/Body

Use protective clothing chemically resistant to this material. Selection of specific items such as face shield, boots, apron, or full body suit will depend on the task.

Environmental

See SECTION 7: Handling and storage and SECTION 13: Disposal considerations for measures to prevent excessive environmental exposure during use and waste disposal.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
---
State Under Standard Conditions
---
Evaporation Rate
Not applicable
Metal Corrosion
---
Odor Threshold
No data available
Ph
Not applicable
Freezing Point
No data available
Decomposition Temperature
No data available
Density
---
Upper Explosive Limit
No data available
Relative Density
1.1
Voc Content
---
Form
Grease
Dynamic Viscosity
Not applicable
Physical State Data
solid
Explosive Limits
---
Lower Explosive Limit
No data available
Solubility In Fat
---
Partition Coefficient
No data available
Crystallisation Point
---
Vapor Pressure
Not applicable
Physical State
solid
Flammability
Not classified as a flammability hazard
Bulk Density
---
Boiling Point
Not applicable
Properties Status
---
Colour
white to off-white
Molecular Weight
No data available
Melting Point
No data available
Relative Evaporation Rate
---
Odor
slight
Flash Point
> 101.1 °C
Softening Point
---
Colour Intensity
---
Kinematic Viscosity
Not applicable
Solidification Point
---
Solubility
---
Auto Ignition Temperature
No data available
Appearance
---
Solubility In Water
No data available
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable
Shipping Name
Not regulated for transport
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOLYKOTE® 44 Medium High Temperature Grease?

The signal word is no signal word.

What is the physical form of MOLYKOTE® 44 Medium High Temperature Grease?

MOLYKOTE® 44 Medium High Temperature Grease is a solid with white to off-white color. It has slight odor.

What is MOLYKOTE® 44 Medium High Temperature Grease used for?

Lubricants and lubricant additives

What are the hazard statements for MOLYKOTE® 44 Medium High Temperature Grease?

This substance has 1 hazard statement:

  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of MOLYKOTE® 44 Medium High Temperature Grease?

The melting point is No data available and the boiling point is Not applicable.