Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOLYKOTE(R) 41 EXTREME HIGH TEMP. BEARING GREASE
- Product Code
- 000000000001889796
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricants and lubricant additives
Manufacturers & Suppliers
Dow Corning Corporation
manufacturer
South Saginaw Road, Midland Michigan 48686
(989) 496-6000
Emergency Contacts
Dow Corning Corporation
(989) 496-5900
24 Hour
CHEMTREC
(800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical nature : Silicone grease
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Carbon black | 1333-86-4 | 14 - 17% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air.
Wash with water and soap as a precaution.
Flush eyes with water as a precaution.
If swallowed, DO NOT induce vomiting. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention if symptoms occur. Get medical attention if irritation develops and persists.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
None known.
Exposure to combustion products may be a hazard to health.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow safe handling advice and personal protective equipment recommendations.
For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in appropriate container.
Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water.
Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbent.
Materials: inert absorbent material, suitable absorbent
Related Products
Similar products with comparable safety profiles
MOLYKOTE® 44 Medium High Temperature Grease
---
MOLYKOTE(R) BR-2 PLUS HIGH PERFORMANCE GREASE
---
MOLYKOTE(R) LONGTERM W2 MULTI-PURPOSE GREASE
---
MOLYKOTE(R) G-4500 FM MULTI-PURPOSE SYNTHETIC GREASE
---
MOLYKOTE® BR2 Plus High Performance Grease
---
MOLYKOTE(R) G-0052 FG WHITE EP BEARING GREASE
---
MOLYKOTE® Longterm W2 Multi-Purpose Grease
---
Molykote® Multilub Synthetic High Performance Grease
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Take care to prevent spills, waste and minimize release to the environment.
Keep in properly labeled containers. Store in accordance with the particular national regulations.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Processing may form hazardous compounds (see section 10). Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations.
Wash hands before breaks and at the end of workday.
Wear the following personal protective equipment: Safety glasses
No personal respiratory protective equipment normally required.
Skin should be washed after contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not classified as a reactivity hazard.
Use at elevated temperatures may form highly hazardous compounds. Can react with strong oxidizing agents. Hazardous decomposition products will be formed at elevated temperatures.
None known.
Oxidizing agents
Benzene, Formaldehyde
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOLYKOTE(R) 41 EXTREME HIGH TEMP. BEARING GREASE?
The signal word is no signal word.
What is the physical form of MOLYKOTE(R) 41 EXTREME HIGH TEMP. BEARING GREASE?
MOLYKOTE(R) 41 EXTREME HIGH TEMP. BEARING GREASE is a grease appearing as grease with black color. It has slight odor.
What is MOLYKOTE(R) 41 EXTREME HIGH TEMP. BEARING GREASE used for?
Lubricants and lubricant additives
What is the melting point of MOLYKOTE(R) 41 EXTREME HIGH TEMP. BEARING GREASE?
The melting point is No data available and the boiling point is Not applicable.