Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WDS Flexible Design, WDS Ultra, WDS Ultra ESH, WDS Ultra HT, WDS Ultra HT-S, WDS Ultra SP
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Insulating material, Sector of use [SU]: SU 3 - Inudstrial uses: Uses of substances as such or in preparations at industrial sites
Uses advised against
No information available at present
Manufacturers & Suppliers
THERMAL CERAMICS LIMITED
distributor
Tebay Road, Bromborough, Wirral, CH62 3PH, UK
+44 (0) 151 334 4030
Porextherm Dämmstoffe GmbH
manufacturer
Heisinger Str. 8/10, D87437 Kempten, Germany
+49 (0)831-575360
http://www.porextherm.com
Emergency Contacts
Emergency Contact
+44 (0) 7931 963 973
Only available during office hours
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains no hazardous ingredients according to Directive 67/548/EEC exceeding the relevant concentration limits
None of the components are radioactive under the terms of European Directive Euratom 96/29.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of skin irritation rinse affected areas with water and wash gently. Do not rub or scratch exposed skin.
In case of eye contact flush abundantly with water; have eye bath available. Do not rub eyes. Seek medical attention is irritation persists.
Immediate Medical Attention
Seek medical attention is irritation persists.
Medical Treatment
No special treatment required, if exposure occurs wash exposed areas to avoid irritation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing agent suitable for surrounding combustible materials.
Non-combustible products,
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Normally not necessary
Pick up mechanically
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid build up of dust. Eating, drinking, smoking as well as food storage is prohibited in the work-room. General hygiene measures for handling of chemicals are applicable. Wash hands before breaks and at end of work. Remove contaminated clothing and protective equipment before entering areas in which food is consumed.
Store in original packaging in a dry area. Always use sealed and clearly labelled containers. Avoid damaging containers.
Eating, drinking, smoking as well as food storage is prohibited in the work-room. General hygiene measures for handling of chemicals are applicable. Wash hands before breaks and at end of work. Remove contaminated clothing and protective equipment before entering areas in which food is consumed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust ventilation, which collects dust at source, can be used. For example down draft tables, emission controlling tools and materials handling equipment.
If applicable leather gloves
Normally not necessary
Normally not necessary. If OEL's are exceeded, if applicable, filter P2 (EN143), observe wearing time limitations for respiratory protection equipment.
Normally not necessary. If applicable protective working garments (e.g. safety shoes, long-sleeved protective working garments)
Refer to local, national or European applicable environmental standards for release to air water and soil. For waste, refer to section13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
The product is stable
Please refer to handling and storage advice in Section 7
Upon heating above 900°C for sustained periods, this amorphous material begins to transform to mixtures of crystalline phases. For further information please refer to Section 16.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
At some authorised disposal sites, dusty waste may be treated differently in order to ensure they are dealt with promptly to avoid them being windblown.
Waste from these materials may be generally disposed off at a landfill, which has been licensed for this purpose.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Chemical Safety Reports have been requested from suppliers, as soon as this information is available it will be shared with downstream users.
Member States are in charge of implementing European Directives into their own national regulation within a period of time normally given in the Directive. Member States may impose more stringent requirements. Please always refer to any national regulation.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WDS Flexible Design, WDS Ultra, WDS Ultra ESH, WDS Ultra HT, WDS Ultra HT-S, WDS Ultra SP?
The signal word is no signal word.
What is the physical form of WDS Flexible Design, WDS Ultra, WDS Ultra ESH, WDS Ultra HT, WDS Ultra HT-S, WDS Ultra SP?
WDS Flexible Design, WDS Ultra, WDS Ultra ESH, WDS Ultra HT, WDS Ultra HT-S, WDS Ultra SP is a grey solid appearing as grey solid with grey color.
What is the solubility of WDS Flexible Design, WDS Ultra, WDS Ultra ESH, WDS Ultra HT, WDS Ultra HT-S, WDS Ultra SP?
Not soluble in water
What is WDS Flexible Design, WDS Ultra, WDS Ultra ESH, WDS Ultra HT, WDS Ultra HT-S, WDS Ultra SP used for?
Insulating material, Sector of use [SU]: SU 3 - Inudstrial uses: Uses of substances as such or in preparations at industrial sites
What is the melting point of WDS Flexible Design, WDS Ultra, WDS Ultra ESH, WDS Ultra HT, WDS Ultra HT-S, WDS Ultra SP?
The melting point is >1200°C and the boiling point is Not applicable.