Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SCOTCH-WELD BRAND DP-760 PART A
- Product Code
- 22-6206-1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Manufacturers & Suppliers
3M
manufacturer
3M Center St. Paul, MN 55144-1000
Emergency Contacts
3M
1-800-364-3577
24 hours
3M
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| TRIETHYLENETETRAMINE EC: 203-950-6 | 112-24-3 | 60 - 70% | No |
| EPOXY RESIN EC: 500-033-5 | 25068-38-6 | 20 - 30% | No |
| GLASS MICROSPHERES EC: 266-046-0 | 65997-17-3 | 5 - 10% | No |
| POLYAMIDE WAX | --- | 1 - 5% | No |
| TREATED FUMED SILICA EC: 614-122-2 | 67762-90-7 | 1 - 5% | No |
| Titaandioxde EC: 236-675-5 | 13463-67-7 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms develop, get medical attention.
Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water for at least 15 minutes. Get immediate medical attention. Wash contaminated clothing and clean shoes before reuse.
Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.
Do not induce vomiting. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention for eye contact, skin contact, and if swallowed. If signs/symptoms develop after inhalation, get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
WELDINGSPRAY PERFECT - 400 ML
---
SIGMASHIELD 420/460/880/880 GF HARDENER
---
7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL
---
SIGMACOVER 295 HARDENER
---
SIGMADUR 188/520/550 HARDENER
---
3M Scotch-Weld(TM) Plastic & Rubber Instant Adhesive PR20
---
Pour-Pac MP-55 Part A
---
Scotch® Glue Stick Classic
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide appropriate local exhaust for cutting, grinding, sanding or machining. Do not use in a confined area or areas with little or no air movement. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control dust, fume, or airborne particles. If ventilation is not adequate, use respiratory protection equipment.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.
Avoid eye contact. The following eye protection(s) are recommended: Full Face Shield, Indirect Vented Goggles.
Avoid breathing of dust created by cutting, sanding, grinding or machining. Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges and P95 particulate prefilters, Half facepiece or fullface air-purifying respirator with organic vapor cartridges and N95 particulate prefilters, Half facepiece or fullface air-purifying respirator with organic vapor cartridges and P100 particulate prefilters. Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SCOTCH-WELD BRAND DP-760 PART A?
The signal word is no signal word.
What is the physical form of SCOTCH-WELD BRAND DP-760 PART A?
SCOTCH-WELD BRAND DP-760 PART A is a solid appearing as off-white, amine odor. with off-white color. It has amine odor. odor.
What is SCOTCH-WELD BRAND DP-760 PART A used for?
Adhesive
What is the melting point of SCOTCH-WELD BRAND DP-760 PART A?
The melting point is Not Applicable and the boiling point is Not Applicable.