Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 495
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
LOCTITE (Ireland) Limited
manufacturer
LOCTITE BELGIUM
local supplier
Emergency Contacts
Local Distributor
03/457.78.33
24 Hour Service
Manufacturer
+353-1-510433
24 Hour Service
Manufacturer
+353-1-519466
24 Hour Service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Cyanoacrylate adhesive
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethylcyanoacrylate | --- | 95% | Yes |
| Polyalkylmethacrylate | --- | 6% | No |
| Stabilizers | --- | 0.1% | No |
Notes
$ ^{*} $ (percentages are less than those given.)
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person to fresh air.
Do not pull bonded skin apart. It may be gently peeled apart using a blunt object such as a spoon, preferably after soaking in warm soapy water.
If the eye is bonded closed, release eyelashes with warm water by covering with wet pad. Keep eye covered with wet pad until debonding is complete, usually within 1-3 days. Do not force eye open.
Symptoms: Cyanoacrylate will bond to eye protein causing lacrymatory effect which will help to debond adhesive.
Ensure that breathing passages are not obstructed. Saliva will slowly separate the solidified product from the mouth (several hours).
Symptoms: The product will polymerise immediately in the mouth making it almost impossible to swallow.
Immediate Medical Attention
Medical advice should be sought in case solid particles of cyanoacrylate trapped behind the eyelid cause any abrasive damage.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Polyethylene or polypropylene gloves are recommended when using large volumes. Do not use PVC, rubber or nylon gloves.
Evap protection should be used where there is any risk of splashing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- Inflammable liquid
- Transport Class
- 3
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 495?
The signal word is no signal word.
What is the physical form of 495?
495 is a liquid appearing as clear liquid . It has sharp characteristic odor.