Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SikaPower®-493
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive, For professional users only.
Manufacturers & Suppliers
Sika Automotive GmbH
manufacturer
Reichsbahnstraße 99, 22525 Hamburg
+4940540020
Emergency Contacts
Emergency Contact
+49 0173-6774799
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction product: bisphenol-A-(epichlorhydrin) and epoxy resin (number average molecular weight <= 700) EC: 500-033-5 | 25068-38-6 | 25 - 50% | Yes |
| reaction product: bisphenol-A-(epichlorhydrin) and epoxy resin (number average molecular weight 700 - 1100) | 25068-38-6 | 5 - 10% | Yes |
| calcium oxide EC: 215-138-9 | 1305-78-8 | 3 - 5% | Yes |
| aluminium dihydrogen triphosphate EC: 237-714-9 | 13939-25-8 | 1 - 2.5% | Yes |
| Cashew, nutshell liq. EC: 232-355-4 | 8007-24-7 | 1% | Yes |
| p-tert-butylphenyl 1-(2,3-epoxy)propyl ether EC: 221-453-2 | 3101-60-8 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Consult a physician after significant exposure.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.
Symptoms: Allergic reactions, Erythema, Dermatitis, Causes skin irritation, May cause an allergic skin reaction.
Immediately flush eye(s) with plenty of water. Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Excessive lachrymation, Causes serious eye irritation.
Do not induce vomiting without medical advice. Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Deny access to unprotected persons.
If the product contaminates rivers and lakes or drains inform respective authorities.
Pick up and arrange disposal
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours/dust. Avoid exceeding the given occupational exposure limits (see section 8). Do not get in eyes, on skin, or on clothing. For personal protection see section 8. Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Smoking, eating and drinking should be prohibited in the application area. Follow standard hygiene measures when handling chemical products
Keep container tightly closed in a dry and well-ventilated place. Store in accordance with local regulations.
Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. This can be achieved by local exhaust extraction or by general ventilation. (EN 689 - Methods for determining inhalation exposure). This applies in particular to the mixing / stirring area.
Chemical-resistant, impervious gloves complying with an approved standard must be worn at all times when handling chemical products. Reference number EN 374. Follow manufacturer specifications. Recommended: Butyl rubber/nitrile rubber gloves.
Safety glasses with side-shields. Eye wash bottle with pure water.
Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. In case this is not sufficient to keep the concentrations under the occupational exposure limits then respiration protection measures must be used.
Protective clothing (e.g. Safety shoes acc. to EN ISO 20345, long-sleeved working clothing, long trousers). Rubber aprons and protective boots are additionally recommended for mixing and stirring work.
Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No dangerous reaction known under conditions of normal use.
Stable under recommended storage conditions.
No data available
No data available
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In accordance with the EWC Waste Regulation the classification of waste is to be assigned to the jurisdiction of the origin of waste.
It is not possible to assign a particular waste identification number.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
No data available
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SikaPower®-493?
The signal word is warning.
What is the physical form of SikaPower®-493?
SikaPower®-493 is a paste appearing as paste with blue color. It has odourless odor.
What is SikaPower®-493 used for?
Adhesive, For professional users only.
What are the hazard statements for SikaPower®-493?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of SikaPower®-493?
The melting point is No data available and the boiling point is No data available.