NextSDS Logo
Safety Data Sheet EN

Silicon Carbide Cement

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Silicon Carbide Cement

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

T

THERMAL CERAMICS UK LTD

manufacturer

LIVERPOOL ROAD, NESTON, SOUTH WIRRAL, CHESHIRE, ENGLAND CH64 3RE

44-(0)151-336-3911

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Silicon Carbide 409-21-2 75 - 85% No
Ball Clay EC: 310-127-6 --- 15 - 25% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air and seek medical advice.

Skin contact

wash with soap and water

Symptoms: can irritate

Eye contact

wash out foreign bodies with plenty of water

Ingestion

Non-toxic - wash out mouth thoroughly with water, give plenty of water to drink and seek medical advice.

Immediate Medical Attention

seek medical advice

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing agent suitable for type of surrounding combustible materials.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Cleanup methods

vacuum or shovel into labelled containers for disposal

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

When handling observe good standards of personal hygiene, avoid swallowing, inhaling dust, and eye and skin contact. The use of respiratory equipment, goggles or gloves is recommended, especially if personal exposure may exceed levels in Section 8.

Storage

These products should be kept cool and dry and containers should be re-sealed after use.

Hygiene

observe good standards of personal hygiene, avoid swallowing, inhaling dust, and eye and skin contact.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Handle/weigh and use under conditions of local exhaust ventilation to avoid creating and breathing dust.

Hands

Wear non-porous anti-slip gloves

Eyes

Only required if dust/chippings are generated during wrecking or cutting.

Respiratory

If this is not possible, use a respirator or suitable respiratory system. Use approved equipment if conditions so require e.g. dust mask.

Skin/Body

Safety footwear and dust proof overalls are recommended

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Appearance
Grey/Black Powder
Crystallisation Point
---
Evaporation Rate
---
Upper Explosive Limit
---
Decomposition Temperature
---
Voc Content
---
Boiling Point
---
Odor Threshold
---
Colour Intensity
---
Vapor Density
---
Relative Evaporation Rate
---
Solidification Point
---
Softening Point
---
Density
---
Melting Point
>1600°C
Solubility In Fat
---
Freezing Point
---
Kinematic Viscosity
---
Form
---
Dynamic Viscosity
---
Cloud Point
---
Partition Coefficient
---
Odor
---
Solubility
---
Physical State
Grey/Black Powder
Properties Status
---
Flash Point
---
Colour
---
Relative Density
---
Molecular Weight
---
Flammability
---
Lower Explosive Limit
---
Metal Corrosion
---
Auto Ignition Temperature
---
Vapor Pressure
---
Physical State Data
solid
Ph
---
Explosive Limits
---
Bulk Density
---
State Under Standard Conditions
---
Solubility In Water
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

disposed of only through licensed waste material handling companies

Disposal

For disposal of non-recoverable spillages or waste these products are classified as non-hazardous under UK and EEC regulations. However local regulations should be consulted and waste disposed of only through licensed waste material handling companies. Where these materials have been contaminated by products which may be classified as hazardous, expert guidance should be sought.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Minimum EEC health and safety requirements are implemented in all EEC States through their own existing legislative system. Some States may have more stringent requirements.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Silicon Carbide Cement?

The signal word is no signal word.

What is the physical form of Silicon Carbide Cement?

Silicon Carbide Cement is a grey/black powder appearing as grey/black powder .

What is the melting point of Silicon Carbide Cement?

The melting point is >1600°C .