Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SILICON CARBIDE POWDER
- Product Form
- POWDER
- Product Code
- 40701005, 40701006, 40701007, 40701008, 40701009, 40701010, 40701021, 40701022
- Chemical Name
- SILICON CARBIDE
Regulatory Identifiers
- CAS Number
- 409-21-2 Check regulations →
- EC Number
- 206-991-8 Check regulations →
Identified Uses
Abrasive for mineralogical specimen preparation.
Uses advised against
No specific uses advised against are identified. (*)
Manufacturers & Suppliers
Struers ApS
manufacturer
Pederstrupvej 84, DK-2750 Ballerup
+45 44 600 800
DHI
Emergency Contacts
NHS
111
EN
Emergency Contact
+45 44 600 800
Only during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains: abrasive.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silicon carbide EC: 206-991-8 | 409-21-2 | 99.5 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If uncomfortable during dust-raising work: Move into fresh air and keep at rest.
Wash skin with soap and water.
If irritation occurs during dust-raising work, flush with plenty of water for at least 15 minutes.
Immediately rinse mouth and drink plenty of water. Keep person under observation.
Immediate Medical Attention
If person becomes uncomfortable seek hospital and bring these instructions.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
Do not use water jet as an extinguisher, as this will spread the fire.
In case of fire, toxic gases may be formed.
Firefighter Protection
Selection of respiratory protection for fire fighting: follow the general fire precautions indicated in the workplace.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Avoid contact with skin and eyes. Avoid inhalation of dust. For personal protection, see section 8. For emergency responders: No specific recommendations. For personal protection, see section 8.
Avoid release to the environment.
Dampen spillage with water. Collect spillage with shovel, broom or the like.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid inhalation of dust. Observe good chemical hygiene practices.
Store in closed original container in a dry place.
Observe good chemical hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe occupational exposure limits and minimise the risk of inhalation of dust. Local exhaust is recommended.
Risk of contact: Wear protective gloves. Nitrile gloves are recommended. The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material. (*)
Risk of contact: Wear goggles/face shield.
During dust-raising work: Use respiratory equipment with particle filter, type P2.
No special precautions.
Not available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
No data available.
No data available.
No data available.
Strong oxidising substances.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The product is not expected to be hazardous to the environment.
12.2. Persistence and degradability
The degradability of the product has not been stated.
12.3. Bioaccumulative potential
No data available on bioaccumulation.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The product does not contain any PBT or vPvB substances.
12.6. Other adverse effects
No known other adverse effects.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste and residues in accordance with local authority requirements.
Dispose of waste and residues in accordance with local authority requirements.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SILICON CARBIDE POWDER?
The signal word is no signal word.
What is the physical form of SILICON CARBIDE POWDER?
SILICON CARBIDE POWDER is a powder with black color. It has odourless odor.
What is the solubility of SILICON CARBIDE POWDER?
insoluble in water
What is SILICON CARBIDE POWDER used for?
Abrasive for mineralogical specimen preparation.
What is the melting point of SILICON CARBIDE POWDER?
The melting point is Not available and the boiling point is Not available.