Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Calcium silicate board
- Product Form
- board
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
PROMAT n.v.
manufacturer
Kuiermanstraat 1, B-1880 Kapelle-op-den-Bos
+32 (0) 15 71 21 86
http://www.promat.be
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Synthetic calcium silicate hydrate | 1344-95-2 | --- | No |
| Natural calcium silicate | 13983-17-0 | --- | No |
| Vermiculite | 1318-00-9 | --- | No |
| Cellulose fibre | 9004-34-6 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take exposed person to fresh air.
Wash the skin thoroughly with water.
Flush eye immediately with water or physiological saline for at least 15 minutes. Remove any contact lenses and open eye widely. If irritation continues, seek medical advice.
Flush mouth thoroughly and drink plenty of water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to handling procedures – use personal safety equipment. Restrict spreading. Collect dust with a type H vacuum cleaner (should comply with BS 5415 as a minimum) or soak with water and sweep up.
Collect dust with a type H vacuum cleaner (should comply with BS 5415 as a minimum) or soak with water and sweep up.
Materials: water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of dust. Care should be taken when handling heavy boards. The boards are not load bearing.
Keep in dry place. Protect from acid.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The work area should be well ventilated if dust is generated during work.
wear protective gloves
Safety glasses suitable for dust protection.
a mask with dust filter type P2 (for fine dust) may be appropriate. Filters have an expiry date and may need replacement. Read the suppliers' information.
normal protective working overalls are adequate.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
inert
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Treat as construction industry waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Occupational Exposure Standards (OES) and Short Term Exposure Limits (STEL) provided for Calcium Silicate, Vermiculite, and Cellulose.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Calcium silicate board?
The signal word is no signal word.
What is the physical form of Calcium silicate board?
Calcium silicate board is a off white sheets appearing as off white sheets with off white color. It has odourless odor.