Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aluminium-Titanium 95/5
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Production of alloys
Manufacturers & Suppliers
KBM AFFILIPS B.V.
manufacturer
P.O.Box 799, 5340 AT Oss, The Netherlands
http://www.kbmaffilips.com
Emergency Contacts
KBM AFFILIPS B.V.
++31-412-681311
Emergency Contact
++32-70-245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. In case of shortness of breath, give oxygen. Consult a physician.
Symptoms: shivers, fever, metal taste in mouth, headache and irritation of the respiratory system (irritation of mucous membranes).
Wash off with plenty of water. Wash contaminated clothing before reuse. If skin irritation persists, call a physician.
Symptoms: Smoke may be irritating.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician immediately.
Symptoms: Smoke may be irritating.
Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice. Drink plenty of water. Call a physician immediately.
Symptoms: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
When symptoms persist or in all cases of doubt seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
class-D fire-extinguishing material (dry chemical powder)
water
Avoid direct viewing of fire as an eye injury may result.
Firefighter Protection
In the event of fire, wear self contained breathing apparatus. Wear personal protective equipment (face-shield, gloves).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protective equipment. See also section 8.
Sweep or shovel spills. See also section 13.
Sweep up and shovel into suitable containers for disposal
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep dry prior to charging into a furnace. Provide appropriate exhaust ventilation at machinery. Avoid dust formation. As offered this product has no known adverse effect on human health. Avoid formation of respirable particles. During handling operations: do not breath dust. Wear personal protective equipment. see also section 8. Avoid contact with skin and eyes. Protect against water.
Keep in properly labeled containers. Keep tightly closed in a dry, cool, and well-ventilated place. Keep away from open flames, hot surfaces and sources of ignition. Protect against water.
When using, do not eat, drink or smoke. Wash hands and face before breaks and immediately after handling the product. Handle in accordance with good industrial hygiene and safety practice.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Protect against water.
Wear protective gloves (EN 388 – EN 407).
Wear safety goggles (EN 166 – EN 169).
In case of insufficient ventilation wear suitable respiratory equipment (EN146 – EN 149).
Wear suitable protective clothing (EN 531 – EN 533).
Provide sufficient mechanical ventilation to maintain the concentration of dust below the admissible limit values.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions. See also section 10.5.
None under normal processing.
Finely divided powder may be flammable at high temperature. Moisture and air sensitive.
strong acids, oxidizing agents and halogens
harmful fumes
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Where possible recycling is preferred to disposal or incineration.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regarding labeling, point 1.3.4 of Annex I to CLP provides that metals in the massive form, as well as alloys, do not require a label if they do not present a hazard to human health by inhalation, ingestion or contact with skin or to the aquatic environment in the form in which they are placed on the market, although classified as hazardous in accordance with the classification criteria of CLP. Referring to Directive 2001/59/EG, concerning the classification, packaging and labeling of dangerous preparations – Annex VI article 9.3, master alloys are exempt from labeling.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aluminium-Titanium 95/5?
The signal word is no signal word.
What is the physical form of Aluminium-Titanium 95/5?
Aluminium-Titanium 95/5 is a rod, waffle plates, cubes appearing as rod, waffle plates, cubes with silvery-grey color.
What is Aluminium-Titanium 95/5 used for?
Production of alloys
What is the melting point of Aluminium-Titanium 95/5?
The melting point is 1110 °C and the boiling point is No data available.