Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aluminium-Zirconium
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Industrial use Use of the substance/mixture : Alloy (Production)
Uses advised against
No additional information available
Manufacturers & Suppliers
KBM-AFFILIPS BV
P.O. Box 799, 5340AT Oss, The Netherlands
+31 412 68 13 11
http://www.kbmaffilips.com
Emergency Contacts
Emergency Contact
+31 30 274 8888
24 hours per day, 7 days per week
Emergency Contact
+32 70 245 245
24 hours per day, 7 days per week
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
8am - 10pm, 7/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. Give oxygen or artificial respiration if necessary. In case of doubt or persistent symptoms, consult always a physician.
Symptoms: Inhalation of fumes may cause metal fume fever. The following symptoms may occur: Fever. Metal taste. Respiratory irritation. (irritation of mucous membranes). Headache.
Remove contaminated clothing and shoes. Gently wash with plenty of soap and water. In case of doubt or persistent symptoms, consult always a physician.
Symptoms: Smoke. May be irritating.
Rinse immediately carefully and thoroughly with eye-bath or water. In case of doubt or persistent symptoms, consult always a physician.
Symptoms: Smoke. May be irritating.
Rinse mouth thoroughly with water. Drink plenty of water. Do not induce vomiting without medical advice. Get medical advice/attention.
Symptoms: May cause gastrointestinal irritation, nausea, vomiting and diarrhoea.
Immediate Medical Attention
Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry chemical powder, alcohol-resistant foam, carbon dioxide (CO2). Dry sand.
Water.
Not flammable. Risk of dust explosion. Finely divided powder may be flammable at high temperature. Avoid direct viewing of fire as an eye injury may result.
Evacuate area. Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Wear recommended personal protective equipment. Concerning personal protective equipment to use, see section 8. Do not breathe dust. Avoid contact with skin, eyes and clothing. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ensure equipment is adequately earthed. Use explosion-proof equipment. Use only non-sparking tools.
scoop solid spill into closing containers.
Do not allow to enter into surface water or drains.
Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Keep dry prior to charging into a furnace. Protect against water. Provide adequate ventilation. Do not breathe dust. Avoid contact with skin, eyes and clothing. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Avoid release to the environment.
Keep container tightly closed. Store in a dry, cool and well-ventilated place. Do not store near or with any of the incompatible materials listed in section 10. Avoid contact with water. Avoid dust formation.
Keep good industrial hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothes. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Organisational measures to prevent/limit releases, dispersion and exposure. See Section 7 for information on safe handling.
Protective gloves (EN 388 - EN 407). Suitable material: Not determined. Thickness : Not determined. Breakthrough time : refer to the recommendations of the supplier. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.
Use suitable eye protection (EN 166): Safety goggles
Not required for normal conditions of use. In case of insufficient ventilation, wear suitable respiratory equipment. In case of dust formation use respirator with filter: P3 (EN 14387)
Wear suitable protective clothing
Avoid release to the environment. Comply with applicable Community environmental protection legislation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None under normal conditions. Reference to other sections: 10.4 & 10.5.
No dangerous reactions known under normal conditions of use.
Avoid dust formation. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Exposure to moisture. Sensitive to air. Zirconium (Zr) : . Molten form.
Strong acids, strong oxidants. Halogens.
Reference to other sections 5.2.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aluminium-Zirconium?
The signal word is no signal word.
What is the physical form of Aluminium-Zirconium?
Aluminium-Zirconium is a solid appearing as plates. notched ingots. with silvery grey. color. It has none. odor.
What is the solubility of Aluminium-Zirconium?
Water: Insoluble
What is Aluminium-Zirconium used for?
Main use category : Industrial use Use of the substance/mixture : Alloy (Production)
What is the melting point of Aluminium-Zirconium?
The melting point is 1100 – 1230 °C and the boiling point is No data available.