NextSDS Logo
Safety Data Sheet EN

Aluminium-Manganese 80/20

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Aluminium-Manganese 80/20
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use, Alloy (Production)

Uses advised against

No additional information available

Manufacturers & Suppliers

KBM-AFFILIPS BV logo

KBM-AFFILIPS BV

national supplier

P.O. Box 799, 5340AT Oss - The Netherlands

+31 412 68 13 11

http://www.kbmaffilips.com

Emergency Contacts

Emergency Contact

+31 30 274 8888

24 hours per day, 7 days per week

Emergency Contact

+32 70 245 245

24 hours per day, 7 days per week

National Poisons Information Centre, Beaumont Hospital

+353 1 809 2566

Healthcare professionals-24/7

National Poisons Information Centre, Beaumont Hospital

+353 1 809 2166

public, 8am - 10pm, 7/7

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Aluminium ingot EC: 231-072-3 7429-90-5 80% No
manganese EC: 231-105-1 7439-96-5 20% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep warm and at rest. Give oxygen or artificial respiration if necessary. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Inhalation of fumes may cause metal fume fever. Irritating to respiratory system. Headache.

Skin contact

Remove contaminated clothing and shoes. Gently wash with plenty of soap and water. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Smoke. May be irritating.

Eye contact

Rinse immediately carefully and thoroughly with eye-bath or water. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Smoke. May be irritating.

Ingestion

Rinse mouth thoroughly with water. Drink plenty of water. Do not induce vomiting without medical advice. Get medical advice/attention.

Symptoms: May cause gastrointestinal irritation, nausea, vomiting and diarrhoea.

Immediate Medical Attention

Get medical advice/attention. In case of doubt or persistent symptoms, consult always a physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

In case of fire, use fire extinguisher class D. (extinguishing powder).

Unsuitable media

Water.

Specific hazards

Not flammable. Risk of dust explosion. Finely divided powder may be flammable at high temperature. Avoid direct viewing of fire as an eye injury may result.

Instructions

Evacuate area. Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire fighting water from entering the environment. Avoid dust formation. Knock down/dilute dust cloud with water spray.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure procedures and training for emergency decontamination and disposal are in place.

Large spill

Large spills: scoop solid spill into closing containers.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Keep dry prior to charging into a furnace. Provide appropriate exhaust ventilation at machinery. Avoid dust formation. as offered : This product has no known adverse effect on human health. Avoid formation of respirable particles. During handling operations: Do not breathe dust. Avoid contact with skin and eyes. Protect against water.

Storage

Keep container tightly closed. Store in a dry, cool and well-ventilated place. Do not store near or with any of the incompatible materials listed in section 10. Protect against water. Avoid dust formation.

Hygiene

Keep good industrial hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothes. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Organisational measures to prevent/limit releases, dispersion and exposure. See Section 7 for information on safe handling. Apply measures to prevent dust explosions. Ensure equipment is adequately earthed.

Hands

Protective gloves (EN 388 - EN 407). Suitable material: Not determined. Thickness: Not determined. Breakthrough time: refer to the recommendations of the supplier. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.

Eyes

Use suitable eye protection (EN 166): Safety goggles

Respiratory

Not required for normal conditions of use. In case of inadequate ventilation wear respiratory protection. Effective dust mask (EN 149). full face mask (DIN EN 136). Half-face mask (DIN EN 140). Filter type: P (EN 143)

Skin/Body

Wear suitable protective clothing

Environmental

Provide sufficient air exchange and/or exhaust in work rooms. Provide adequate ventilation to minimize dust and/or vapour concentrations.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Physical State
Solid
Melting Point
890 °C
Explosive Limits
---
Form
---
Physical State Data
solid
Relative Density
No data available
Lower Explosive Limit
Not applicable
Freezing Point
No data available
Vapor Density
No data available
Appearance
notched ingots.
Density
3
Flammability
Not flammable
Properties Status
---
Colour
Silvery grey.
Metal Corrosion
---
Softening Point
---
Molecular Weight
---
Flash Point
Not applicable
Solubility In Water
Insoluble
State Under Standard Conditions
---
Decomposition Temperature
No data available
Partition Coefficient
Not applicable
Solubility In Fat
---
Vapor Pressure
No data available
Upper Explosive Limit
Not applicable
Crystallisation Point
---
Odor
None.
Colour Intensity
---
Relative Evaporation Rate
No data available
Evaporation Rate
---
Dynamic Viscosity
Not applicable
Boiling Point
No data available
Ph
Not applicable
Solidification Point
---
Odor Threshold
Not available
Kinematic Viscosity
Not applicable
Bulk Density
---
Voc Content
---
Solubility
Water: Insoluble
Auto Ignition Temperature
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

None under normal conditions. Reference to other sections 10.5.

Hazardous reactions

None under normal processing.

Avoid

Do not allow contact with water. Prevent moisture contact. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Sensitive to air. See Section 7 for information on safe handling.

Incompatible

Strong acids. oxidising substances. Halogens. Phosphorus . Molten form : Reacts violently with water. See also section 7 .

Decomposition

Reference to other sections 5.2.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Avoid release to the environment. Dispose of empty containers and wastes safely. See Section 7 for information on safe handling. Refer to manufacturer/supplier for information on recovery/recycling. Recycling is preferred to disposal or incineration. If recycling is not possible, eliminate in accordance with local valid waste disposal regulations.

Disposal

Recycling is preferred to disposal or incineration. If recycling is not possible, eliminate in accordance with local valid waste disposal regulations.

Waste Codes

European waste catalogue (2001/573/EC, 75/442/EEC, 91/689/EEC). Waste codes should be assigned by the user based on the application for which the product was used. EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable
Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Aluminium-Manganese 80/20?

The signal word is no signal word.

What is the physical form of Aluminium-Manganese 80/20?

Aluminium-Manganese 80/20 is a solid appearing as notched ingots. with silvery grey. color. It has none. odor.

What is the solubility of Aluminium-Manganese 80/20?

Water: Insoluble

What is Aluminium-Manganese 80/20 used for?

Industrial use, Alloy (Production)

What is the melting point of Aluminium-Manganese 80/20?

The melting point is 890 °C and the boiling point is No data available.