Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MC-223BK MAKE-UP
- Product Code
- MC-223BK
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Printing Ink related material
Manufacturers & Suppliers
Domino UK Ltd
national supplier
Bar Hill, Cambridge, CB23 8TU
+44 (0) 1954 782551
Emergency Contacts
Emergency Contact
+44 (0)207 858 0111
24 Hours
Emergency Contact
999
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air at once. If breathing stops, provide artificial respiration. Keep affected person warm and at rest. Get medical attention immediately.
Symptoms: Vapours may cause headache, fatigue, dizziness and nausea.
Remove affected person from source of contamination. Wash skin thoroughly with soap and water. Get medical attention if any discomfort continues.
Symptoms: Prolonged contact may cause redness, irritation and dry skin.
Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Continue to rinse for at least 15 minutes. Get medical attention immediately.
Symptoms: May cause severe eye irritation.
Never give anything by mouth to an unconscious person. Do not induce vomiting. Do not induce vomiting. Get medical attention immediately.
Symptoms: May cause nausea, headache, dizziness and intoxication.
Immediate Medical Attention
Get medical attention immediately.
Medical Treatment
No specific recommendations. If in doubt, get medical attention promptly.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with alcohol-resistant foam, carbon dioxide or dry powder. Water spray.
Fire creates: Toxic gases/vapours/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2). Take precautionary measures against static discharges.
Use water to keep fire exposed containers cool and disperse vapours. Move containers from fire area if it can be done without risk.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Absorb spillage with non-combustible, absorbent material. Collect and place in suitable waste disposal containers and seal securely.
Absorb in vermiculite, dry sand or earth and place into containers.
Do not discharge into drains or watercourses or onto the ground.
Absorb spillage with non-combustible, absorbent material. Collect and place in suitable waste disposal containers and seal securely.
Materials: non-combustible, absorbent material, vermiculite, dry sand, earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, sparks and open flame. Avoid spilling. Avoid contact with skin and eyes. Avoid inhalation of vapours. Use approved respirator if air contamination is above an acceptable level. Vapours may accumulate on the floor and in low-lying areas. Static electricity and formation of sparks must be prevented.
Store in tightly-closed, original container in a dry, cool and well-ventilated place.
Avoid contact with skin and eyes.
Keep away from heat, sparks and open flame. Static electricity and formation of sparks must be prevented.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
All handling should only take place in well-ventilated areas.
Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. It should be noted that liquid may penetrate the gloves. Frequent changes are recommended.
Wear chemical splash goggles.
No specific recommendations. Respiratory protection must be used if the airborne contamination exceeds the recommended occupational exposure limit.
Wear appropriate clothing to prevent any possibility of skin contact.
Keep container tightly sealed when not in use.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures.
There are no known reactivity hazards associated with this product.
Not available.
Avoid contact with strong oxidising agents.
Strong oxidising agents.
Fire creates: Toxic gases/vapours/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1210
- Shipping Name
- PRINTING INK RELATED MATERIAL
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulation (EC) No 1907/2006 (REACH), Workplace Exposure Limits EH40, Approved Classification and Labelling Guide (Sixth edition) L131.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MC-223BK MAKE-UP?
The signal word is danger.
What is the physical form of MC-223BK MAKE-UP?
MC-223BK MAKE-UP is a liquid. appearing as liquid. with light (or pale). black. color. It has ketonic. odor.
What is the solubility of MC-223BK MAKE-UP?
Slightly soluble in water. Soluble in the following materials: Organic solvents.
What is MC-223BK MAKE-UP used for?
Printing Ink related material
What are the hazard statements for MC-223BK MAKE-UP?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.