MAK-127-MMAP MakeUp

In case of accident by inhalation: remove casualty to fresh air and keep at rest. Consult physician.

After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water and soap.

Take off lenses. Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Consult physician.

Calm the victim. Rinse mouth thoroughly with water. Immediately get medical attention. Let water be swallowed in little sips (dilution effect). Do not induce vomiting.

alcohol resistant foam. Carbon dioxide (CO2). Dry extinguishing powder. Water spray. Atomized water.

High power water jet.

In case of fire may form: Carbon monoxide. Nitrogen oxides (NOx). Vapours may form explosive mixtures with air.

Due to danger of explosion, prevent leakage of vapors into cellars, flues and ditches. Do not empty into drains or the aquatic environment.

Absorb with liquid-binding material

Materials: sand, diatomaceous earth, acid- or universal binding agents

Wear suitable protective clothing, gloves and eye/face protection. Do not leave the container open. Handle open container with care. Keep container tightly closed. If technical suction or ventilation measures are not possible or are insufficient, protective breathing apparatus must be worn. When using do not eat, drink or smoke. Protect skin by using skin protective cream. Wash hands when done working with material; at breaks, lunch, shift changes, etc. Keep away from food, drink and animal feeding stuffs. Never clean the skin or the clothes with the preparation!

Keep only in the original container in a cool, well ventilated place. Keep container tightly closed. Protect against high warming or solar radiation.

When using do not eat, drink or smoke. Protect skin by using skin protective cream. Wash hands when done working with material; at breaks, lunch, shift changes, etc.

Take precautionary measures against static discharges. Keep away from sources of ignition. No smoking. Highly flammable.

Technical measures and the application of appropriate methods of operation, as indicated in section 7, have precedence over to the application of personal protection equipment. Recommended analysis procedures for workplace measurement: please see the series „Dangerous Substances" (GA 13) of the Federal Institute for Occupational Safety and Health (BauA Germany).

Type of chemical protective gloves to choose depends on the concentration and quantity of dangerous substances as well as on work place specifications. In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the gloves. EN 374

Tightly sealed safety glasses. EN 166

If technical suction or ventilation measures are not possible or are insufficient, protective breathing apparatus must be worn. Respiratory filter A1 (brown) up to 1000 mL / m³ (ppm); Respiratory filter A1 (brown) up to 5000 mL / m³ (ppm); Respiratory filter A1 (brown) up to 10000 mL / m³ (ppm)

Carry long-sleeved, flame impeding and anti-static labour safety clothing.

Please see chapter 6 and 7

This product is stable.

High warming > 45°C and / or solar radiation. Heating up forwards the transit of liquid to the vapour phase and the accumulation of potentially explosive atmosphere.

Keep away from strong acids, leachates, heavy metal salts and reducing materials.

Keep away from strong acids, leachates, heavy metal salts and reducing materials.

163, 944