Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Paraffin Wax 56-58C in BLOCK FORM for Histology
- Product Form
- BLOCK FORM
- Chemical Name
- Paraffin wax
- Synonyms
- Solid
Regulatory Identifiers
- CAS Number
- 8002-74-2 Check regulations →
- EC Number
- 232-315-6 Check regulations →
- REACH No.
- 01-2119488076-30-0007
Identified Uses
Laboratory chemicals, Industrial & for professional use only.
Manufacturers & Suppliers
Bio-Chem Chemicals
5455 Nicholson Road, Science Market7/28 Vardaan House Ambala Cantt, 133001 - Haryana Ansari Road Daryaganj New Delhi-110002 INDIA
+91 82952 41953
www.biofinechemical.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A EC: 232-315-6 | 8002-74-2 | --- | No |
Notes
No components need to be disclosed according to the applicable regulations.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Wash off with soap and plenty of water.
Flush eyes with water as a precaution.
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Immediate Medical Attention
No data available
Medical Treatment
No data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
No special environmental precautions required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Paraffin Wax 56-58C in BLOCK FORM for Histology known by?
Paraffin Wax 56-58C in BLOCK FORM for Histology is also known as: Solid
What is the hazard signal word for Paraffin Wax 56-58C in BLOCK FORM for Histology?
The signal word is no signal word.
What is the physical form of Paraffin Wax 56-58C in BLOCK FORM for Histology?
Paraffin Wax 56-58C in BLOCK FORM for Histology is a solid with colorless color. It has no data available odor.
What is Paraffin Wax 56-58C in BLOCK FORM for Histology used for?
Laboratory chemicals, Industrial & for professional use only.
What is the melting point of Paraffin Wax 56-58C in BLOCK FORM for Histology?
The melting point is 58 - 62 C and the boiling point is 341 - 665 C at ca.1013,250 hPa.