Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Additiv Diadem 130F
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Color
Manufacturers & Suppliers
LAMBERT PRODUCTS NV
manufacturer
Au Fonds Race 24, 4300 Waremme, Belgium
Emergency Contacts
Emergency Contact
+32 (0) 19339797
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
There are no ingredients present which are classified in the concentrations applicable health or the environment within the current knowledge of the supplier, PBT or vPvB substances are or who have a workplace exposure limit and hence require reporting in this section.
Notes
There are no ingredients present which are classified in the concentrations applicable health or the environment within the current knowledge of the supplier, PBT or vPvB substances are or who have a workplace exposure limit and hence require reporting in this section.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove exposed person to fresh air.
Wash with plenty of soap and plenty of water. Consult a doctor if skin irritation persists.
Long lasting rinse Rinse opened with water, if necessary, use eye wash. If symptoms persist, seek medical advice.
Rinse mouth and drink plenty of water. Do not induce vomiting. If symptoms persist, seek medical advice.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Foam. Dry powder. Carbon dioxide (CO2).
Strong water jet.
In case of a fire, there any arise poisonous (CO, CO2 and other organic gases) gases.
Extinguishing measures to the surroundings. Standard procedure for chemical fires.
Firefighter Protection
If necessary, use in case of fire, self contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protective equipment. Avoid contact with eyes and skin.
Avoid entering into drains, water courses or soil.
Use oil sucking materials f.e chemical absorbents.
Materials: oil sucking materials f.e chemical absorbents
Related Products
Similar products with comparable safety profiles
TEGO® Addbond DS 1300
---
Duraglass 41v - Additive
---
Polimix 400F
CAS: 136155-46-9
HiTEC® 9345S Performance Additive
UFI: X03X-TDD5-9153-0SSQ
HiTEC® 34022 Performance Additive
UFI: 1D6P-M0MN-K005-UJJU
HiTEC® 33300 Performance Additive
UFI: HAY8-PN5S-0V62-59VY
HiTEC® 3339 Performance Additive
UFI: QUAA-33G9-N04M-5HN0
HiTEC® 11183 Performance Additive
UFI: DCJS-J0GD-G00F-WY7Y
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe mixture. Avoid generation of vapors and aerosols.
Store in closed containers. Open container in well ventilated areas.
Immediately change contaminated clothing. Preventive skin protection. Wash hands and face after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves - oil resistant. Glove material: nitrile rubber, butyl rubber or fluoro rubber. Recommended thickness: ≈ 0,4 mm. Penetration time of glove material Value for the permeation: Level = 480 min. The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of breakthrough time is recommended.
Safety glasses
Not required, except in case of aerosol formation. Avoid inhalation of vapors. Use respiratory protective device against the effects of fumes / dust / aerosol. Combination filter, eg. As DIN 3181 ABEK
Body protection: work clothes
Do not discharge into surface water or drains
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
This product is stable in normal-use temperatures.
No dangerous reaction known under conditions of normal use. Fumes can combine with air to form an explosive mixture.
No information available
no information available
no
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The waste key number in accordance with the European refuse catalog (EAK) depends on the industry and the process, from which the waste originates. For this reason one cannot indicate a waste key number overall for a product, but the waste producer must let itself individually possible be assigned these in arrangement with the responsible authorities and/or a disposal enterprise.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- No
- Transport Class
- No transport regulations.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No Precautionary Labels.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Additiv Diadem 130F?
The signal word is no signal word.
What is the physical form of Additiv Diadem 130F?
Additiv Diadem 130F is a liquid appearing as like oil with yellow color. It has without odor.
What is Additiv Diadem 130F used for?
Color