NextSDS Logo
Safety Data Sheet EN

Sokalan® K 90 P

CAS 9003-39-8

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sokalan® K 90 P
Chemical Name
Polyvinylpyrrolidone

Regulatory Identifiers

CAS Number
9003-39-8 Check regulations →

Identified Uses

Raw material, for industrial use only

Manufacturers & Suppliers

B

BASF SE

manufacturer

67056 Ludwigshafen, GERMANY

B

BASF Polska Sp. z o.o.

national supplier

Al. Jerozolimskie 142b, 02-305 Warszawa, POLAND

+48 22 5709-999

Emergency Contacts

International emergency number

+49 180 2273-112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

polyvinylpyrrolidone

Chemical Name CAS Number Concentration Hazardous
polyvinylpyrrolidone --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Keep patient calm, remove to fresh air.

Skin contact

Wash thoroughly with soap and water

Eye contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

Ingestion

Rinse mouth and then drink 200-300 ml of water.

Medical Treatment

Symptomatic treatment (decontamination, vital functions).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear chemical resistant protective gloves.

Eyes

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Respiratory

Breathing protection if breathable aerosols/dust are formed. Particle filter with low efficiency for solid particles (e.g. EN 143 or 149, Type P1or FFP1)

Skin/Body

No body protection required if used for intended purpose and satisfying generally accepted industrial hygiene rules., Standard work clothes and shoes.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
approx. 200 C (decomposition)
Physical State
solid
Auto Ignition Temperature
---
Cloud Point
---
Density
---
Physical State Data
solid
Kinematic Viscosity
---
Colour Intensity
---
Metal Corrosion
---
Solubility In Fat
---
Vapor Pressure
not applicable
Odor Threshold
not determined
Relative Evaporation Rate
---
Colour
white
State Under Standard Conditions
---
Form
powder
Molecular Weight
---
Odor
almost odourless
Decomposition Temperature
> 165 C
Relative Density
---
Boiling Point
The product is a non-volatile solid.
Crystallisation Point
---
Upper Explosive Limit
For solids not relevant for classification and labelling.
Voc Content
---
Vapor Density
---
Explosive Limits
---
Appearance
---
Lower Explosive Limit
For solids not relevant for classification and labelling.
Flammability
not highly flammable (other)
Solubility In Water
270 g/l (23 C)
Dynamic Viscosity
10.000 - 25.000 mPa.s (20 %(m), 23 C)
Ph
5,0 - 9,0 (water, 10 %(m), 20 C)
Solidification Point
---
Solubility
organic solvents soluble
Evaporation Rate
The product is a non-volatile solid.
Softening Point
---
Freezing Point
---
Partition Coefficient
-3,4
Flash Point
No data available.
Bulk Density
approx. 350 - 550 kg/m3
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3088
Shipping Name
SELF-HEATING SOLID, ORGANIC, N.O.S. (contains 1-ETHENYL2-PYRROLIDINONE, HOMOPOLYMER)
Transport Class
4.2
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sokalan® K 90 P?

The signal word is no signal word.

What is the physical form of Sokalan® K 90 P?

Sokalan® K 90 P is a solid with white color. It has almost odourless odor.

What is the solubility of Sokalan® K 90 P?

organic solvents soluble

What is Sokalan® K 90 P used for?

Raw material, for industrial use only

What is the melting point of Sokalan® K 90 P?

The melting point is approx. 200 C (decomposition) and the boiling point is The product is a non-volatile solid..