Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sokalan® CP 13 S
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Raw material for the chemical-technical industry
Manufacturers & Suppliers
»BASF T.O.V.» LLC
national supplier
19, Druzhby Narodiv blvd., Kyiv, UKRAINE, 01042
+38 044 591 55 95 (96)
Emergency Contacts
Emergency Contact
+49 180 22 73 11 20
Emergency Contact
0 800 30 72 72
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
polyacrylic acid, modified, in water
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| polyacrylic acid, modified | --- | --- | No |
| water | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air.
Wash thoroughly with soap and water
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth and then drink 200-300 ml of water.
Medical Treatment
Symptomatic treatment (decontamination, vital functions).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, dry powder, foam
water jet
harmful vapours, carbon oxides
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Pick up with suitable absorbent material.
Dike spillage. Pump off product.
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.
Pump off product. Pick up with suitable absorbent material.
Materials: suitable absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures necessary provided product is used correctly.
Keep container tightly closed and in a cool place.
No special precautions necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN ISO 374-1). Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other. Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Wearing of closed work clothing is recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated. Peroxides: The product does not contain peroxides. The product/the substance has not a tendency towards the formation of peroxide.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: Not corrosive to: Aluminium steel
No hazardous reactions when stored and handled according to instructions.
See SDS section 7 - Handling and storage.
carbon steel (iron), light metals, strong bases, strong acids, mild steel, reactive chemicals
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be disposed of or incinerated in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
If other regulatory information applies that is not already provided elsewhere in this safety data sheet, then it is described in this subsection.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sokalan® CP 13 S?
The signal word is no signal word.
What is the physical form of Sokalan® CP 13 S?
Sokalan® CP 13 S is a aqueous solution with colourless to slightly yellow color. It has product specific odor.
What is Sokalan® CP 13 S used for?
Raw material for the chemical-technical industry