Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SOLVESSO™ 150
- Product Form
- Aromatic Hydrocarbon
- Chemical Name
- Hydrocarbons, C10, aromatics, >1% naphthalene
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119463588-24-0000; 01-2119463588-24
Identified Uses
Manufacture of substance, Distribution of substance, Use as an intermediate, Formulation and (re)packing of substances and mixtures, Use in Coatings - Industrial, Use in Cleaning Agents - Industrial, Use in oil field drilling and production operations - Industrial, Lubricants - Industrial, Metal working fluids / rolling oils - Industrial, Use as binders and release agents - Industrial, Use as a fuel - Industrial, Functional Fluids - Industrial, Use in laboratories - Industrial, Water treatment chemicals - Industrial, Mining chemicals, Use in Coatings - Professional, Use in Cleaning Agents - Professional, Use in oil field drilling and production operations - Professional, Lubricants - Professional (Low Release), Lubricants - Professional (High Release), Metal working fluids / rolling oils - Professional, Use as binders and release agents - Professional, Agrochemical uses - Professional, Use as a fuel - Professional, Functional Fluids - Professional, Road and construction applications, Use in laboratories - Professional, Polymer processing - Professional, Water treatment chemicals - Professional, Use in Coatings - Consumer, Use in Cleaning Agents - Consumer, Lubricants - Consumer (Low Release), Lubricants - Consumer (High Release), Agrochemical uses - Consumer, Use as a fuel - Consumer, Functional Fluids - Consumer
Uses advised against
The above Identified Uses are specific to the customer for whom this Safety Data Sheet is intended and are uses for which the information in this Safety Data Sheet is applicable. Other uses for this product may be supported/registered. This product is not recommended for any industrial, professional or consumer use other than those which are supported/registered.
Manufacturers & Suppliers
ExxonMobil Petroleum & Chemical BV
national supplier
Polderdijkweg, B-2030 Antwerpen, Belgium
+32 3 790 31 11
ExxonMobil Chemical Ltd.
local supplier
MAILPOINT 14, MARSH LANE, FAWLEY, SOUTHAMPTON, SO45 1TX HAMPSHIRE, Great Britain
(+44) (0) 23 8089 3822
Emergency Contacts
CHEMTREC
+44-870-820-04-18
National Poison Control Centre
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10, aromatics, >1% - naphthalene EC: 919-284-0 | --- | 100% | Yes |
| naphthalene EC: 202-049-5 | 91-20-3 | 10% | Yes |
Notes
All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. Concentration values may vary. Note: Any entry in the EC# column that begins with the number "9" is a Provisional List Number provided by ECHA pending publication of the official EC Inventory Number for the substance. See Section 15 for additional CAS number information for the substance. Note: See SDS Section 16 for full text of hazard statements.
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove from further exposure. Get immediate medical assistance. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. Give supplemental oxygen, if available. If breathing has stopped, assist ventilation with a mechanical device.
Wash contact areas with soap and water. Remove contaminated clothing. Launder contaminated clothing before reuse.
Flush thoroughly with water. If irritation occurs, get medical assistance.
Seek immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
If ingested, material may be aspirated into the lungs and cause chemical pneumonitis.
Medical Treatment
Treat appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use explosion-proof ventilation equipment. Adequate ventilation should be provided whenever the material is heated or mists are generated.
Chemical resistant gloves are recommended. Viton, minimum 0.71 mm thickness or comparable protective barrier material with a high performance level for continuous contact use conditions, permeation breakthrough minimum 480 minutes in accordance with CEN standards EN 420 and EN 374.
If contact is likely, safety glasses with side shields are recommended.
If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators to be considered for this material include: Half-face filter respirator Type A filter material, European Committee for Standardization (CEN) standards EN 136, 140 and 405 provide respirator masks and EN 149 and 143 provide filter recommendations. For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.
Chemical/oil resistant clothing is recommended.
Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SOLVESSO™ 150?
The signal word is danger.
What is the physical form of SOLVESSO™ 150?
SOLVESSO™ 150 is a liquid appearing as clear with colourless color. It has aromatic odor.
What is the solubility of SOLVESSO™ 150?
water Negligible
What is SOLVESSO™ 150 used for?
Manufacture of substance, Distribution of substance, Use as an intermediate, Formulation and (re)packing of substances and mixtures, Use in Coatings - Industrial, Use in Cleaning Agents - Industrial, Use in oil field drilling and production operations - Industrial, Lubricants - Industrial, Metal working fluids / rolling oils - Industrial, Use as binders and release agents - Industrial, Use as a fuel - Industrial, Functional Fluids - Industrial, Use in laboratories - Industrial, Water treatment chemicals - Industrial, Mining chemicals, Use in Coatings - Professional, Use in Cleaning Agents - Professional, Use in oil field drilling and production operations - Professional, Lubricants - Professional (Low Release), Lubricants - Professional (High Release), Metal working fluids / rolling oils - Professional, Use as binders and release agents - Professional, Agrochemical uses - Professional, Use as a fuel - Professional, Functional Fluids - Professional, Road and construction applications, Use in laboratories - Professional, Polymer processing - Professional, Water treatment chemicals - Professional, Use in Coatings - Consumer, Use in Cleaning Agents - Consumer, Lubricants - Consumer (Low Release), Lubricants - Consumer (High Release), Agrochemical uses - Consumer, Use as a fuel - Consumer, Functional Fluids - Consumer
What are the hazard statements for SOLVESSO™ 150?
This substance has 4 hazard statements:
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of SOLVESSO™ 150?
The melting point is Not technically feasible and the boiling point is 182C (360F) - 206C (403F) [ASTM D86].