Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SOLVESSO™ 150 ND
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solvent
Manufacturers & Suppliers
ExxonMobil Petroleum & Chemical BVBA
manufacturer
Polderdijkweg, B-2030 Antwerpen Belgium
+32 3 543 31 11
Emergency Contacts
CHEMTREC
+(32)-28083237
CHEMTREC
+(33)-975181407
CHEMTREC
0800 181 7059
CHEMTREC
+(49)-69643508409
CHEMTREC
+(44)-8708200418
CHEMTREC
0800 789767
CHEMTREC
+(39)-0245557031
CHEMTREC
+(31)-858880596
CHEMTREC
900 868538
CHEMTREC
+(34)-931768545
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Solvent naphtha (petroleum), heavy arom. | 64742-94-5 | 100% | Yes |
| naphthalene | 91-20-3 | 1% | Yes |
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. Concentration values may vary.
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove from further exposure. Get immediate medical assistance. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. Give supplemental oxygen, if available. If breathing has stopped, assist ventilation with a mechanical device.
Wash contact areas with soap and water. Remove contaminated clothing. Launder contaminated clothing before reuse.
Flush thoroughly with water. If irritation occurs, get medical assistance.
Symptoms: Irritation
Seek immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical assistance. Seek immediate medical attention.
Medical Treatment
If ingested, material may be aspirated into the lungs and cause chemical pneumonitis. Treat appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
Straight streams of water
Vapour is flammable and heavier than air. Vapour may travel across the ground and reach remote ignition sources, causing a flashback fire danger. Hazardous material.
Evacuate area. Prevent run-off from fire control or dilution from entering streams, sewers or drinking water supply. Use water spray to cool fire exposed surfaces and to protect personnel.
Firefighter Protection
Fire-fighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if you can do so without risk. Do not touch or walk through spilled material.
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Normal antistatic work clothes are usually adequate.
Dyke far ahead of liquid spill for later recovery and disposal. Full body suit of chemical resistant, antistatic material is recommended.
Prevent entry into waterways, sewers, basements or confined areas.
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Remove from the surface by skimming or with suitable absorbents.
Materials: earth, sand or other non-combustible material, suitable absorbents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Potentially toxic/irritating fumes/vapour may be evolved from heated or agitated material. Use only with adequate ventilation. Prevent small spills and leakage to avoid slip hazard. Material can accumulate static charges which may cause an electrical spark (ignition source). Use proper bonding and/or earthing procedures.
Store in a cool, well-ventilated area. Keep container closed. Handle containers with care. Open slowly in order to control possible pressure release.
Material can accumulate static charges which may cause an electrical spark (ignition source). Use proper bonding and/or earthing procedures.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
Hazardous polymerization will not occur.
Open flames and high energy ignition sources.
Strong oxidisers
Material does not decompose at ambient temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The material is expected to be toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment.
12.2 Persistence and degradability
The material is expected to be inherently biodegradable and to degrade rapidly in air. Hydrolysis and photolysis are not expected to be significant.
12.4 Mobility in soil
The material is expected to partition to sediment and wastewater solids and is moderately volatile.
12.7 Other adverse effects
The product contains Volatile Organic Compounds (VOC).
12.1 Toxicity
Persistence, Degradability and Bioaccumulation Potential
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products
Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Naphthalene)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Listed or exempt from listing/notification on the following chemical inventories : AIIC, DSL, ENCS, IECSC, KECI, PICCS, TCSI, TSCA
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SOLVESSO™ 150 ND?
The signal word is danger.
What is the physical form of SOLVESSO™ 150 ND?
SOLVESSO™ 150 ND is a liquid appearing as clear with colourless color. It has aromatic odor.
What is SOLVESSO™ 150 ND used for?
Solvent
What are the hazard statements for SOLVESSO™ 150 ND?
This substance has 4 hazard statements:
- H227: Combustible liquid.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.