Davidson Marking System Blue Dye, All sizes

IF INHALED: Remove to fresh air and keep at rest in a comfortable position for breathing.

Symptoms: May cause respiratory irritation.

IF ON SKIN (or clothing): Remove affected clothing and wash all exposed skin with water for at least 15 minutes.

Symptoms: May cause skin irritation.

IF IN EYES: Immediately flush with plenty of water for at least 15 minutes. Remove contact lenses if present and easy to do so. Continue rinsing.

Symptoms: Direct contact with eyes is likely to be irritating.

IF SWALLOWED: rinse mouth thoroughly. Do not induce vomiting without advice from poison control center. Get medical attention if you feel unwell.

Symptoms: May cause gastrointestinal irritation.

Foam. Water spray. Dry chemical. Carbon dioxide. Sand.

Do not use a heavy water stream.

Product is not flammable.

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.

Ventilate area. Evacuate area. Keep upwind. Spill should be handled by trained clean-up crews properly equipped with respiratory equipment and full chemical protective gear.

Avoid release to the environment.

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.

Materials: inert solids, such as clay or diatomaceous earth

Do not handle until all safety precautions have been read and understood. Wear personal protective equipment. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Store in original container. Keep the container tightly closed. Store in a well-ventilated place. Keep cool.

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Provide adequate general and local exhaust ventilation. Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Use explosion-proof equipment with flammable materials. Ensure adequate ventilation, especially in confined areas.

Use gloves chemically resistant to this material when prolonged or repeated contact could occur. Gloves should be classified under Standard EN 374 or ASTM F1296. Suitable gloves for this specific application can be recommended by the glove supplier. Suggested glove materials are: Neoprene, Nitrile/butadiene rubber, Polyethylene, Ethyl vinyl alcohol laminate, PVC or vinyl.

Use eye protection suitable to the environment. Avoid direct contact with eyes. Protective goggles.

Use NIOSH (or other equivalent national standard) -approved dust/particulate respirator. Where vapor, mist, or dust exceed PELs or other applicable OELs, use NIOSH-approved respiratory protective equipment.

Wear long sleeves, and chemically impervious PPE/coveralls to minimize bodily exposure.

Stable under normal conditions.

The product is non-reactive under normal conditions of use, storage and transport.

None known.

No additional information available

Strong oxidizing agents. Mineral acids. Strong alkalis.

Ammonia. Hydrogen cyanide.

Do not discharge to public wastewater systems without permit of pollution control authorities.

Dispose in a safe manner in accordance with local/national regulations.