NextSDS Logo
Safety Data Sheet EN

Barquat™ MB-50

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Barquat™ MB-50
Chemical Name
Barquat™ MB-50

Regulatory Identifiers

CAS Number
N/A
REACH No.
01-2119965180-41-0002

Identified Uses

Biocides

Manufacturers & Suppliers

L

Lonza Ltd

manufacturer

Muenchensteinerstrasse 38 CH-4002 Basel, Switzerland

+41 61 316 81 11

Emergency Contacts

Lonza Ltd

+41 61 313 94 94

24h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Corr. Cat. 1B H314
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/ physician.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides

Chemical Name CAS Number Concentration Hazardous
Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides EC: 270-325-2 68424-85-1 50% Yes

Notes

For the full text of the H-Statements mentioned in this Section, see Section 16. For the full text of the R-phrases mentioned in this Section, see Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If breathing is irregular or stopped, administer artificial respiration. Give oxygen. Call a physician immediately.

Skin contact

Take off all contaminated clothing immediately. After contact with skin, wash immediately with plenty of soap and water. Call a physician immediately.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician immediately.

Ingestion

Call a physician immediately. Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Call a physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry powder, Water spray, Foam

Specific hazards

Heating or fire can release toxic gas.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not flush into surface water or sanitary sewer system.

Cleanup methods

Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13).

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

—

Related Products

Similar products with comparable safety profiles

B

Bardac™ 2270

---

B

Bardac™ 22

---

B

Bardac™ 2240

---

B

Bardac™ 208M

---

B

BAEROSTAB UBZ 1-14 MF

---

H

Hysol MB 50

---

P

POLICARBODAL 5000

---

P

Pour-Pac MP-55 Part B

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes.

Fire prevention

Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Suitable material : Nitrile rubber Break through time : > 480 min Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).

Eyes

Tightly fitting safety goggles Face-shield

Respiratory

In the case of vapour formation use a respirator with an approved filter. Respirator with a vapour filter (EN 141) Respirator with ABEK filter.

Skin/Body

Choose body protection according to the amount and concentration of the dangerous substance at the work place. Rubber or plastic apron Rubber or plastic boots

Environmental

Do not flush into surface water or sanitary sewer system.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
light yellow
Colour Intensity
---
Form
---
Odor
aromatic
Odor Threshold
---
Ph
5 - 7 (10 g/l ; 20 °C)
Melting Point
---
Boiling Point
ca. 100 °C
Flash Point
> 100 °C Pensky-Martens c.c.(DIN 51758)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
0 °C
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
< 0,00001 hPa (20 °C) (Information refers to the main component.)
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0,98 g/cm3 (20 °C)
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
ca. 300 mPa.s (20 °C)
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Stable under recommended storage conditions.

Hazardous reactions

Hazardous polymerisation does not occur.

Avoid

Protect from frost.

Incompatible

Strong oxidizing agents, Reducing agents

Decomposition

Thermal decomposition : 200 °C

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Toxicity to fish : no data available Ref. 1392.8 / 000000007252

12.2 Persistence and degradability

Biodegradability : no data available

12.3 Bioaccumulative potential

Bioaccumulation : no data available

12.4 Mobility in soil

Behaviour in environmental : no data available

12.5 Results of PBT and vPvB assessment

Assessment : This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating (vPvB).

The mixture contains no substances considered to be persistent, bioaccumulating and toxic (PBT) or very persistent and very bioaccumulating (vPvB).

12.6 Other adverse effects

Additional advice : no data available The following ecotoxicological data refer to: Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides (CAS-No.: 68424-85-1)

No data available regarding other adverse effects.

Toxicity

Toxicity to fish (LC50) : 0,28 mg/l Species: Pimephales promelas (fathead minnow) Acute toxicity Exposure time: 96 h Method: US-EPA Toxicity to fish (NOEC) : 0,032 mg/l Species: Pimephales promelas (fathead minnow) Early-life Stage Exposure time: 34 d Method: EPA-FIFRA Toxicity to daphnia and other aquatic invertebrates (EC50) : 0,016 mg/l Species: Daphnia magna (Water flea) Immobilization Exposure time: 48 h Method: OECD Test Guideline 202 (NOEC) : 0,0042 mg/l Species: Daphnia magna (Water flea) Reproduction Test Exposure time: 21 d Method: EPA-FIFRA Toxicity to algae (ErC50) : 0,049 mg/l Species: Pseudokirchneriella subcapitata (green algae) Cell multiplication inhibition test Exposure time: 72 h Method: OECD Test Guideline 201 M-Factor (Acute aquatic toxicity) : 10 M-Factor (Chronic aquatic toxicity) : 1 Toxicity to bacteria (EC50) : 7,75 mg/l Species: activated sludge Respiration inhibition Exposure time: 3 h Method: OECD Test Guideline 209

Persistence and degradability

Biodegradability : OECD Confirmatory Test: > 90 % Method: OECD Test Guideline 303 A Modified SCAS Test: > 99 % Testing period: 7 d Method: OECD Test Guideline 302 A CO2 Evolution Test: 95,5 % Readily biodegradable Testing period: 28 d Method: OECD Test Guideline 301B

Behaviour in environmental compartments : Adsorption/Soil

Behaviour in environmental compartments : Adsorption/Soil Method: EPA-FIFRA
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations. Contact waste disposal services.

Disposal

Dispose of in accordance with local regulations. Contact waste disposal services.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1760
Shipping Name
Corrosive liquid, n.o.s. (Alkyldimethylbenzylammoniumchloride)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Barquat™ MB-50?

The signal word is danger.

What is the physical form of Barquat™ MB-50?

Barquat™ MB-50 is a liquid with light yellow color. It has aromatic odor.

What is Barquat™ MB-50 used for?

Biocides

What are the hazard statements for Barquat™ MB-50?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H314: Causes severe skin burns and eye damage.
  • H410: Very toxic to aquatic life with long lasting effects.