Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Bardac™ 2240
- Chemical Name
- Bardac™ 2240
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Biocidal product, Surfactant
Manufacturers & Suppliers
Lonza Ltd
manufacturer
Muenchensteinerstrasse 38 CH-4002 Basel, Switzerland
+41 61 316 81 11
Emergency Contacts
Lonza Ltd
+41 61 313 94 94
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Didecyldimethylammonium chloride EC: 230-525-2 | 7173-51-5 | 40% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is irregular or stopped, administer artificial respiration. Give oxygen.
Take off all contaminated clothing immediately. After contact with skin, wash immediately with plenty of soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder, Water spray, Foam
Heating or fire can release toxic gas.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system.
collect with non-combustible absorbent material
Materials: sand, earth, diatomaceous earth, vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes.
To maintain product quality, do not store in heat or direct sunlight. Keep container tightly closed. Do not store below 10°C !
Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable material : Nitrile rubber Break through time : > 480 min Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Tightly fitting safety goggles Face-shield
In the case of vapour formation use a respirator with an approved filter. Respirator with a vapour filter (EN 141) Respirator with ABEK filter.
Choose body protection according to the amount and concentration of the dangerous substance at the work place. Rubber or plastic apron Rubber or plastic boots
Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended storage conditions.
Stable under normal conditions.
no data available
Strong oxidizing agents
No decomposition if stored normally.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT) or very persistent and very bioaccumulating (vPvB).
12.6 Other adverse effects
no data available
12.1 Toxicity
12.2 Persistence and degradability
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Contact waste disposal services.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1760
- Shipping Name
- Corrosive liquid, n.o.s. (Didecyldimethylammonium chloride)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Bardac™ 2240?
The signal word is danger.
What is the physical form of Bardac™ 2240?
Bardac™ 2240 is a liquid with light yellow color. It has aromatic odor.
What is Bardac™ 2240 used for?
Biocidal product, Surfactant
What are the hazard statements for Bardac™ 2240?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H410: Very toxic to aquatic life with long lasting effects.