SIPMED 35

remove to fresh air. Obtain medical advice if symptoms persist.

Symptoms: irritation to the nose or throat, or coughing

Wash skin thoroughly with soap and water after contact. Change contaminated clothing and dry-clean and launder before re-use.

Wash eyes thoroughly with copious quantities of water, ensuring eyelids are held open. Obtain medical advice if any pain or redness develops or persists.

Symptoms: pain or redness

If contamination of the mouth occurs, wash it out thoroughly with water. Obtain medical advice if large amounts are swallowed - do not induce vomiting.

dry powder, foam, water fog or (for small fires) carbon dioxide

BCF/halon extinguishers

As with all mineral oil based products, this materials is combustible.

Contain the spill and blanket with extinguishing agent. Use water spray to cool fire-exposed containers and as a protective screen.

Large spillages must be notified to the appropriate authorities.

Contain and recover spillage by pumping or by using sand, sawdust or other suitable absorbents.

Materials: sand, sawdust or other suitable absorbents

Protective clothing, including impervious gloves, should be worn if skin contact is anticipated. Wear a face visor or goggles if eye contact can accidentally occur. Protective clothing should be regularly inspected and maintained; overalls should be dry-cleaned and laundered. Discard oil-saturated leather articles.

Store at ambient temperature in a well-ventilated area, away from sources of ignition.

Protective clothing should be regularly inspected and maintained; overalls should be dry-cleaned and laundered. Discard oil-saturated leather articles.

Store away from sources of ignition.

Use impervious gloves

Avoid contact with eyes. Use suitable eye protection

Avoid inhalation of mists, fumes or vapour generated during use.

Avoid contact with skin. Change heavily contaminated clothing. Use single-use disposable cloths and discard when soiled.

Stable at ambient temperatures.

Avoid contact with strong oxidising agents.

strong oxidising agents

Thermal decomposition can produce a variety of compounds, the precise nature of which will depend on the decomposition conditions. Incomplete combustion will generate smoke and hazardous gases, including carbon monoxide.

incineration, land-fill or other suitable means approved by the Local Authority

Waste or surplus oil, or oil-contaminated materials, may be disposed of by incineration, land-fill or other suitable means approved by the Local Authority.