Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SIPMED 20R
- Product Code
- H020DR
Regulatory Identifiers
- CAS Number
- 64742-54-7 Check regulations →
- EC Number
- 265-157-1 Check regulations →
- REACH No.
- 01-2119484627-25-XXXX
Identified Uses
Manufacture of substance - Industrial, Use in metal working fluids/rolling oils - Industrial, Use in metal working fluids/rolling oils - Professional, Use in binder and release agents - Industrial, Use in binder and release agents - Professional, Use in agrochemicals - Professional, Use in agrochemicals - Consumer, Use in rubber production and processing - Industrial, Use in polymer processing - Industrial, Use as an intermediate - Industrial, Use in lubricants - Industrial, Use in lubricants (Low release) - Professional, Use in lubricants (high release) - Professional, Use in lubricants (Low release) - Consumer, Use in lubricants (high release) - Consumer, Use in laboratories - Industrial, Use in laboratories - Professional, Use in water treatment agents - Industrial, Use in water treatment agents - Professional, Use in explosives - Professional, Use in functional fluids - Industrial, Use in functional fluids - Professional, Other Consumer Uses - Consumer, Distribution of substance - Industrial, Formulation and (re)packing of substances and mixtures - Industrial, Use in cleaning agents - Industrial, Use in cleaning agents - Professional, Use in cleaning agents - Consumer, Uses in coatings - Industrial, Use in coatings - Professional, Use in coatings - Consumer
Uses advised against
None known.
Manufacturers & Suppliers
SIP Oils and Fluids BV
manufacturer
Muilenstraat 1/2, B-1770 Liedekerke, Belgium
+44 207 7170100
https://sip.com/
Emergency Contacts
The National Poisons Information Centre (NPIC)
+353 (0) 1 809 2166
7 days a week, 8am- 10pm
The National Poisons Information Centre (NPIC)
+353 (0) 1 809 2566
24 h service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 100% | No |
Notes
See full text of H-phrases in section 16. Occupational exposure limits are listed in section 8, if these are available.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of discomfort: bring the person into fresh air.
Upon irritation: rinse with water.
Rinse gently with lukewarm water. Remove any contact lenses if this is easy to do. Continue rinsing.
Rinse and flush mouth thoroughly and consume large quantities of water.
Immediate Medical Attention
Contact a doctor or casualty department take the label or this safety data sheet. Contact a doctor if in doubt about the injured persons condition or if the symptoms persist. In case of persistent eye irritation or discomfort: Seek medical help. In case of continued discomfort: seek medical assistance and bring this safety data sheet.
Medical Treatment
Treat symptomatically. Information to medics: Bring this safety data sheet or the label from this product.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
SIPMED 35
---
SIPMED 15 LP
---
SIPMED 35USP
---
SIPMED 68
---
SIPMED 12, SIPMED 12CR, SIPMED 15, SIPMED 15 LP, SIPMED 15 USP, SIPMED 17 LP, SIPMED 18, SIPMED 20
CAS: 8042-47-5, 64742-55-8
SIPMED 4, SIPMED 6, SIPMED 8 USP, SIPMED 10
CAS: 64742-47-8, 64742-55-8, 8042-47-5
SIP D40
---
SIPTECH 30R, SIPTECH 38R, SIPTECH 40R, SIPTECH 100R
CAS: 64742-54-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Apply standard precautions during use of the product. Avoid inhalation of vapours.
Material: Nitrile, Breakthrough time: 480 min.
Safety glasses EN166
Respiratory protection is not needed in the event of adequate ventilation.
Dedicated work clothing should be worn.
No specific requirements.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SIPMED 20R?
The signal word is no signal word.
What is the physical form of SIPMED 20R?
SIPMED 20R is a liquid appearing as clear and bright with clear and bright color. It has odourless odor.
What is SIPMED 20R used for?
Manufacture of substance - Industrial, Use in metal working fluids/rolling oils - Industrial, Use in metal working fluids/rolling oils - Professional, Use in binder and release agents - Industrial, Use in binder and release agents - Professional, Use in agrochemicals - Professional, Use in agrochemicals - Consumer, Use in rubber production and processing - Industrial, Use in polymer processing - Industrial, Use as an intermediate - Industrial, Use in lubricants - Industrial, Use in lubricants (Low release) - Professional, Use in lubricants (high release) - Professional, Use in lubricants (Low release) - Consumer, Use in lubricants (high release) - Consumer, Use in laboratories - Industrial, Use in laboratories - Professional, Use in water treatment agents - Industrial, Use in water treatment agents - Professional, Use in explosives - Professional, Use in functional fluids - Industrial, Use in functional fluids - Professional, Other Consumer Uses - Consumer, Distribution of substance - Industrial, Formulation and (re)packing of substances and mixtures - Industrial, Use in cleaning agents - Industrial, Use in cleaning agents - Professional, Use in cleaning agents - Consumer, Uses in coatings - Industrial, Use in coatings - Professional, Use in coatings - Consumer
What is the melting point of SIPMED 20R?
The melting point is Not applicable and the boiling point is No data available.