VERTISCREEN 052R

Keep at rest. Provide fresh air. Consult a physician if necessary.

Symptoms: May cause irritation of respiratory tract. Inhalation of high vapour concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting.

After contact with skin, wash immediately with plenty of water and soap. Consult a physician if necessary.

Symptoms: May be irritating.

Remove contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Consult a physician if necessary.

Symptoms: Irritating to eyes.

Rinse mouth immediately and drink plenty of water. Get medical advice/attention. Never give anything by mouth to an unconscious person or a person with cramps.

Symptoms: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Strong water jet

Highly flammable. Vapours can form explosive mixtures with air. Vapours are heavier than air and may spread along floors. Vapours can travel considerable distances to a source of ignition where they can ignite, flash back, or explode.

In the event of fire, cool tanks with water spray. Evacuate area.

Evacuate area. Keep people away from and upwind of spill/leak. Provide adequate ventilation. Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray.

Allow to evaporate. Ventilate the area.

Dam up. Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal. Large spills should be collected mechanically (remove by pumping) for disposal.

Do not allow to enter into surface water or drains.

Clean-up methods - small spillage: Allow to evaporate. Ventilate the area. Clean-up methods - large spillage: Dam up. Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal. Large spills should be collected mechanically (remove by pumping) for disposal.

Materials: inert absorbent material

Provide adequate ventilation. Wear suitable protective equipment. Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ensure all equipment is electrically grounded before beginning transfer operations. Take any precaution to avoid mixing with incompatible materials.

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not store near or with any of the incompatible materials listed in section 10.

Handle in accordance with good industrial hygiene and safety practice. Wash hands and face before breaks and immediately after handling of the product. Keep working clothes separately. Take off contaminated clothing and wash before reuse. Keep away from food, drink and animal feedingstuffs. When using do not eat, drink or smoke.

Keep away from heat/sparks/open flames/hot surfaces. - No smoking.

Provide adequate ventilation. Use only in area provided with appropriate exhaust ventilation. Take precautionary measures against static discharges. Use only non-sparking tools. Use only explosion-proof equipment. See also section 7. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres. Organisational measures to prevent /limit releases, dispersion and exposure

Wear chemically resistant gloves (tested to EN374) Nitrile rubber Breakthrough time (maximum wearing time) > 480m Thickness of the glove material 0,5mm Butyl rubber. Breakthrough time (maximum wearing time) > 480m Thickness of the glove material 0,5mm The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Tightly fitting safety goggles (EN 166)

In case of insufficient ventilation, wear suitable respiratory equipment. Wear a full face respirator conforming to EN136 with Type A filter or better. (EN 141) Wear a respirator conforming to EN140 with Type A filter or better. High concentrations can remove oxygen and cause dizziness or suffocation. Container device with compressed air (DIN EN 137)

Overalls, apron and boots recommended.

Do not allow to enter into surface water or drains. Comply with applicable Community environmental protection legislation.

The product is stable under storage at normal ambient temperatures.

Highly flammable

Vapours can form explosive mixtures with air.

Heat, flames and sparks.

Incompatible with strong acids and oxidizing agents.

Burning produces noxious and toxic fumes. Carbon oxides

Handle with care. See also section 7. Handling and storage. Dispose according to legislation. Where possible recycling is preferred to disposal or incineration. Collect and dispose of waste product at an authorised disposal facility.

Collect and dispose of waste product at an authorised disposal facility.