SCREEN TFT

Remove person to fresh air and keep comfortable for breathing. If signs/symptoms develop, get medical attention.

Wash skin with plenty of water. Seek medical attention if irritation develops.

Rinse eyes with water as a precaution. Seek medical attention if irritation develops.

Call a poison center or a doctor if you feel unwell.

Water spray. Dry powder. Foam. Carbon dioxide.

Do not use a heavy water stream.

Pressurised container: May burst if heated.

Move containers from fire area if it can be done without personal risk. Use standard firefighting procedures and consider the hazards of other involved materials.

Ventilate spillage area. No open flames, no sparks, and no smoking. Evacuate unnecessary personnel. Ventilate area.

Take up small spills with dry chemical absorbent.

For large spills, confine the spill in a dike and charge it with wet sand or earth for subsequent safe disposal.

Avoid release to the environment.

Mechanically recover the product. Following product recovery, flush area with water. Clean surface thoroughly to remove residual contamination.

Materials: dry chemical absorbent

Wear personal protective equipment. Ensure good ventilation of the work station. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. Avoid prolonged exposure. Handle in accordance with good industrial hygiene and safety procedures.

Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Store in a well-ventilated place. Keep cool. Keep container closed when not in use.

Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Good general ventilation should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

For incidental contact with the product wear chemical-resistant gloves (standard EN 374). The use of disposable gloves is acceptable provided that they are changed immediately after a splash or spill. Neoprene gloves are recommended.

Use eye protection according to EN 166. Safety glasses with side shields.

No respiratory protection needed under normal use conditions. In case of insufficient ventilation, wear suitable respiratory equipment

Wear suitable protective clothing

Avoid release to the environment. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.

Stable under normal conditions.

Pressurised container: May burst if heated.

No dangerous reactions known under normal conditions of use.

Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.

Strong oxidizing agents.

Under normal conditions of storage and use, hazardous decomposition products should not be produced. Carbon oxides (CO, CO2).