NextSDS Logo
Safety Data Sheet EN

Potassium hydroxide 0.5 mol/l

CAS 1310-58-3

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Potassium hydroxide 0.5 mol/l
Product Code
CL05.1106
Chemical Name
Potassium hydroxide

Regulatory Identifiers

CAS Number
1310-58-3 Check regulations →
REACH No.
01-2119487136-33

Identified Uses

Reagent for analysis

Manufacturers & Suppliers

C

CHEM-LAB NV

manufacturer

Industriezone "De Arend" 2, B-8210 Zedelgem, BELGIUM

+32 50 28 83 20

Emergency Contacts

CHEM-LAB NV

00 (32) 50.28.83.20

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. H314

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 Causes severe skin burns and eye damage.

Precautionary Statements

P280 Wear protective gloves, protective clothing, eye protection, face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
N/A EC: 215-181-3 1310-58-3 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air, seek medical advice.

Skin contact

Wash off with plenty of water. Remove contaminated clothing.

Eye contact

Rinse out with plenty of water for at least 10 minutes with the eyelid held wide open. lmmediately call an ophtalmologist.

Ingestion

Never give anything by mouth to an unconscious person. Make victim drink water (two glasses at most), avoid vomiting (risk of perforation!). lmmediately call in physician. Do not attempt to neutralize.

Symptoms: risk of perforation!

Immediate Medical Attention

lmmediately call an ophtalmologist. lmmediately call in physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Protective clothing should be selected specificlly for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. See section 7.1

Hands

Required.

Eyes

Required.

Respiratory

Required when vapours/aerosols/dust are generated. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

Required.

Environmental

Do not allow to enter sewerage system.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
100C
Odor Threshold
---
Flash Point
---
Relative Density
---
Molecular Weight
56.11 g/mol
Dynamic Viscosity
---
Voc Content
---
Metal Corrosion
---
Ph
pH > 12
Solubility In Water
soluble
Kinematic Viscosity
---
Flammability
---
Decomposition Temperature
---
Vapor Pressure
---
State Under Standard Conditions
---
Freezing Point
---
Partition Coefficient
---
Solidification Point
---
Melting Point
0C
Crystallisation Point
---
Density
1,02 g/ml
Softening Point
---
Bulk Density
---
Form
Liquid
Odor
ethanol
Lower Explosive Limit
---
Upper Explosive Limit
---
Relative Evaporation Rate
---
Explosive Limits
---
Colour
Colourless
Physical State
Liquid
Vapor Density
---
Colour Intensity
---
Solubility
---
Properties Status
---
Physical State Data
liquid
Evaporation Rate
---
Auto Ignition Temperature
---
Cloud Point
---
Appearance
---
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 1814
Shipping Name
Potassium hydroxide solution
Transport Class
8
Packing Group
II
ADR

no

IMDG

no

IATA

no

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Potassium hydroxide 0.5 mol/l?

The signal word is danger.

What is the physical form of Potassium hydroxide 0.5 mol/l?

Potassium hydroxide 0.5 mol/l is a liquid with colourless color. It has ethanol odor.

What is Potassium hydroxide 0.5 mol/l used for?

Reagent for analysis

What are the hazard statements for Potassium hydroxide 0.5 mol/l?

This substance has 1 hazard statement:

  • H314: Causes severe skin burns and eye damage.

What is the melting point of Potassium hydroxide 0.5 mol/l?

The melting point is 0C and the boiling point is 100C.