Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2-Ethoxyethanol (stabilised) for synthesis
- Product Code
- 8.00857
- Chemical Name
- 2-Ethoxyethanol
Regulatory Identifiers
- CAS Number
- 110-80-5 Check regulations →
- REACH No.
- 01-2119560582-38-XXXX
Identified Uses
Chemical for synthesis Intermediate for use under strictly controlled conditions
Manufacturers & Suppliers
Merck KGaA
manufacturer
Frankfurter Str. 250, D-64271 DARMSTADT
+49 (0)6151 72-0
Emergency Contacts
CHEMTREC (GB)
+(44)-870-8200418
CHEMTREC Ireland
+(353)-19014670
CHEMTREC India
001-803-017-9114
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Formula : C4H10O2 Molecular weight : 90,12 g/mol CAS-No. : 110-80-5 EC-No. : 203-804-1 Index-No. : 603-012-00-X
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Ethoxyethanol EC: 203-804-1 | 110-80-5 | --- | Yes |
For the full text of the H-Statements mentioned in this Section, see Section 16.
Notes
Millipore- 8.00857 The life science business of Merck operates as MilliporeSigma in the US and Canada
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2) Foam Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air at elevated temperatures. Development of hazardous combustion gases or vapours possible in the event of fire.
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains. Risk of explosion.
Take up carefully with liquid-absorbent material. Clean up affected area.
Materials: liquid-absorbent material (e.g. Chemizorb®)
Related Products
Similar products with comparable safety profiles
2-Methyltetrahydrofuran (stabilised) for synthesis
CAS: 96-47-9
2-Ethoxyethanol
CAS: 110-80-5
2-Ethoxyethanol
CAS: 110-80-5
2-Mercaptoethanol for synthesis
CAS: 60-24-2
2-Mercaptoethanol for synthesis
CAS: 60-24-2
Polyethylene glycol 20000 (stabilised) for synthesis
CAS: 25322-68-3
2-(Dimethylamino)-ethanol for synthesis
CAS: 108-01-0
2-Ethoxyethanol TECHNICAL
CAS: 110-80-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition. Keep locked up or in an area accessible only to qualified or authorized persons. Recommended storage temperature see product label.
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: butyl-rubber, Minimum layer thickness: 0,7 mm, Break through time: 480 min, Material tested: Butoject (KCL 898). Splash contact: Material: Viton, Minimum layer thickness: 0,7 mm, Break through time: 240 min, Material tested: Vitoject (KCL 890 / Aldrich Z677698, Size M). When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Recommended Filter type: Filter A (acc. to DIN 3181) for vapours of organic compounds. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Flame retardant antistatic protective clothing.
Do not let product enter drains. Risk of explosion.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture does not contain PBT or vPvB components at levels of 0.1% or higher.
12.6 Other adverse effects
The substance may endanger drinking-water supplies if released in large quantities; no interference with wastewater treatment plants is expected with proper use.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1171
- Shipping Name
- ETHYLENE GLYCOL MONOETHYL ETHER
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2-Ethoxyethanol (stabilised) for synthesis?
The signal word is danger.
What is the physical form of 2-Ethoxyethanol (stabilised) for synthesis?
2-Ethoxyethanol (stabilised) for synthesis is a liquid appearing as liquid, colorless with colorless color. It has ether-like odor.
What is the solubility of 2-Ethoxyethanol (stabilised) for synthesis?
Methanol at 20 C - soluble Ether at 20 C - soluble
What is 2-Ethoxyethanol (stabilised) for synthesis used for?
Chemical for synthesis Intermediate for use under strictly controlled conditions
What are the hazard statements for 2-Ethoxyethanol (stabilised) for synthesis?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapor.
- H302: Harmful if swallowed.
- H331: Toxic if inhaled.
- H360FD: May damage fertility. May damage the unborn child.
What is the melting point of 2-Ethoxyethanol (stabilised) for synthesis?
The melting point is -70 C and the boiling point is 133 - 135 C at 1.013,25 hPa.