Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Cyclohexane
- Product Code
- S25292A
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
AquaPhoenix Scientific
manufacturer
9 Barnhart Drive, Hanover, PA 17331
Fisher Science Education
distributor
15 Jet View Drive, Rochester, NY 14624
Emergency Contacts
Fisher Science Education
800-535-5053
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Percentages are by weight
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Cyclohexane | 110-82-7 | 95% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move exposed individual to fresh air. Loosen clothing as necessary and position individual in a comfortable position. Seek medical advice if discomfort or irritation persists.
Symptoms: Shortness of breath
Wash affected area with soap and water. Rinse/flush exposed skin gently using water for 15-20 minutes. Seek medical attention if irritation persists or if concerned.
Protect unexposed eye. Rinse/flush exposed eye(s) gently using water for 15-20 minutes. Remove contact lens(es) if able to do so during rinsing. Seek medical attention if irritation persists or if concerned.
Rinse mouth thoroughly. Do not induce vomiting. Have exposed individual drink sips of water. Seek medical attention if irritation, discomfort or vomiting persists.
Immediate Medical Attention
If seeking medical attention, provide SDS document to physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry chemical powder. Carbon dioxide. If in laboratory setting, follow laboratory fire suppression procedures. Use appropriate fire suppression agents for adjacent combustible materials or sources of ignition
Water may be ineffective because it may not cool the material below its flash point.
Combustion products may include carbon oxides or other toxic vapors. Risk of ignition. Flammable. Vapors may travel to source of ignition and flash back. Containers may explode when heated.
Move product containers away from fire or keep cool with water spray as a protective measure, where feasible.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop the spill, if possible. If in a laboratory setting, follow Chemical Hygiene Plan procedures.
Prevent from reaching drains, sewer or waterway.
Transfer to a disposal or recovery container. Collect liquids using vacuum or by use of absorbents.
Materials: absorbents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of aerosols. Follow good hygiene procedures when handling chemical materials. Do not eat, drink, smoke, or use personal products when handling chemical substances. Avoid splashes or spray in enclosed areas. Use only under chemical fume hood. Wear personal protective equipment. Wash hands after handling. Avoid contact with skin, eyes, and clothing. Do not breathe in vapors or spray mist. Keep away from open flames, hot surfaces and sources of ignitions. Use only non-sparking tools. Use explosion proof equipment. Take precautionary measures against static discharge.
Provide ventilation for containers. Avoid storage near extreme heat, ignition sources or open flame. Store away from foodstuffs. Store away from oxidizing agents. Store in cool, dry conditions in well sealed containers. Store with like hazards. Keep in a flammable area.
Follow good hygiene procedures when handling chemical materials. Do not eat, drink, smoke, or use personal products when handling chemical substances. Wash hands after handling.
Keep away from open flames, hot surfaces and sources of ignitions. Use only non-sparking tools. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Emergency eye wash fountains and safety showers should be available in the immediate vicinity of use/handling. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapor or mists below the applicable workplace exposure limits (Occupational Exposure Limits-OELs) indicated above. Use only under fume hood.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation being used/handled. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Safety glasses with side shields or goggles.
Not required under normal conditions of use. Use suitable respiratory protective device when high concentrations are present. Use suitable respiratory protective device when aerosol or mist is formed. For spills, respiratory protection may be advisable.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
Vapours may form explosive mixture with air.
Store away from oxidizing agents, strong acids or bases. Incompatible materials, excess heat. Keep away from open flames, hot surfaces and sources of ignition.
Strong acids. Strong bases. Strong oxidizing agents.
Carbon oxides (CO, CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Product/containers must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1145
- Shipping Name
- Cyclohexane
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Cyclohexane?
The signal word is danger.
What is the physical form of Cyclohexane?
Cyclohexane is a clear, colorless liquid. appearing as clear, colorless liquid. with colorless color. It has sweet odor.
What is the solubility of Cyclohexane?
Insoluble
What are the hazard statements for Cyclohexane?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour
- H304: May be fatal if swallowed and enters airways
- H315: Causes skin irritation
- H336: May cause drowsiness or dizziness
- H410: Very toxic to aquatic life with long lasting effects
What is the melting point of Cyclohexane?
The melting point is 6.5 C and the boiling point is 81C.