NextSDS Logo
Safety Data Sheet EN

Sulfuric acid 1 mol/l

CAS 7664-93-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sulfuric acid 1 mol/l
Product Code
CL05.2658
Chemical Name
Sulfuric acid

Regulatory Identifiers

CAS Number
7664-93-9 Check regulations →
REACH No.
01-2119458838-20

Identified Uses

Reagent for analysis

Manufacturers & Suppliers

C

CHEM-LAB NV

manufacturer

Industriezone "De Arend" 2, B-8210 Zedelgem, BELGIUM

+32 50 28 83 20

Emergency Contacts

Emergency Contact

00 (32) 50.28.83.20

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1A H314

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P280 Wear protective gloves, protective clothing, eye protection, face protection.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P309 + P311 IF exposed or if you feel unwell: Call a POISON CENTER or doctor/physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Hazardous Ingredients:

Chemical Name CAS Number Concentration Hazardous
Sulfuric acid 95-97% a.r. 7664-93-9 5 - 10% Yes

Notes

For the full text of H-Phrases mentioned in this Section, see Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air, seek medical advice.

Skin contact

Wash off with plenty of water. Remove contaminated clothing.

Eye contact

Rinse out with plenty of water for at least 10 minutes with the eyelid held wide open. lmmediately call an ophtalmologist.

Ingestion

Never give anything by mouth to an unconscious person. Make victim drink water (two glasses at most), avoid vomiting (risk of perforation!). lmmediately call in physician. Do not attempt to neutralize.

Medical Treatment

No data available

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Protective clothing should be selected specificlly for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. See section 7.1

Hands

Required.

Eyes

Required.

Respiratory

Required when vapours/aerosols are generated. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

Required.

Environmental

Do not allow to enter sewerage system.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Decomposition Temperature
---
Vapor Density
---
Flammability
---
Physical State Data
liquid
Solubility
---
Appearance
---
Crystallisation Point
---
Solubility In Water
soluble
Colour Intensity
---
Odor
Odourless
Dynamic Viscosity
---
Softening Point
---
Ph
pH > 2
State Under Standard Conditions
---
Cloud Point
---
Metal Corrosion
---
Density
1,08 g/ml
Bulk Density
---
Physical State
Liquid
Molecular Weight
98.08 g/mol
Solubility In Fat
---
Flash Point
---
Relative Evaporation Rate
---
Odor Threshold
---
Boiling Point
100C
Lower Explosive Limit
---
Upper Explosive Limit
---
Vapor Pressure
---
Colour
Colourless
Evaporation Rate
---
Properties Status
---
Voc Content
---
Melting Point
0C
Explosive Limits
---
Freezing Point
---
Form
Liquid
Solidification Point
---
Partition Coefficient
---
Kinematic Viscosity
---
Relative Density
---
Auto Ignition Temperature
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 2796
Shipping Name
Sulfuric acid
Transport Class
8
Packing Group
II
ADR

yes

IMDG

yes

IATA

yes

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sulfuric acid 1 mol/l?

The signal word is danger.

What is the physical form of Sulfuric acid 1 mol/l?

Sulfuric acid 1 mol/l is a liquid with colourless color. It has odourless odor.

What is Sulfuric acid 1 mol/l used for?

Reagent for analysis

What are the hazard statements for Sulfuric acid 1 mol/l?

This substance has 2 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Sulfuric acid 1 mol/l?

The melting point is 0C and the boiling point is 100C.