Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Buffer solution pH 7 (phosphate) Traceable to NIST, Stabilised
- Product Code
- J/2850/21, J/2850/24, J/2850/17, J/2850/15, J/2850/15X, J/2850/24X
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Fisher Scientific UK
national supplier
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
Thermo Fisher Scientific
national supplier
Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium
Emergency Contacts
Fisher Scientific UK
01509 231166
Chemtrec US
(800) 424-9300
Chemtrec EU
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium phosphate dibasic EC: 231-448-7 | 7558-79-4 | 1% | No |
| Dihydrogen potassium phosphate EC: 231-913-4 | 7778-77-0 | 1% | No |
| Sodium chloride EC: 231-598-3 | 7647-14-5 | 1% | No |
| Water EC: 231-791-2 | 7732-18-5 | 98% | No |
Notes
Full text of Hazard Statements: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur. If not breathing, give artificial respiration.
Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Drink 1 or 2 glasses of water. Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Buffer solution pH 6 (phosphate) Traceable to NIST
---
Buffer solution pH 8 (borate) Traceable to NIST
UFI: EHPA-P2EM-XX0C-VAS8
Buffer solution pH 10 (borate) Traceable to NIST
UFI: QSPA-62GT-UX0U-VCHF
Buffer solution pH 4 (phthalate) Traceable to NIST
---
Buffer Solution pH 7.00 ± 0.02
---
Buffer Solution, pH 7.00
---
Buffer solution pH10,00(+/-0,05), conserved
UFI: 01WV-HPYF-KA74-3DRU
Buffer solution pH4.00 (colorless), conserved
UFI: XHVV-GPU2-RA75-4C8F
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves. Glove material: Natural rubber, Nitrile rubber, Neoprene, PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374 (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
Wear safety glasses with side shields (or goggles) (European standard - EN 166)
No protective equipment is needed under normal use conditions. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particle filter. Small scale/Laboratory use: Maintain adequate ventilation.
Wear appropriate protective gloves and clothing to prevent skin exposure.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Buffer solution pH 7 (phosphate) Traceable to NIST, Stabilised?
The signal word is no signal word.
What is the physical form of Buffer solution pH 7 (phosphate) Traceable to NIST, Stabilised?
Buffer solution pH 7 (phosphate) Traceable to NIST, Stabilised is a liquid appearing as colorless with colorless color. It has no information available odor.
What is the solubility of Buffer solution pH 7 (phosphate) Traceable to NIST, Stabilised?
No information available
What is Buffer solution pH 7 (phosphate) Traceable to NIST, Stabilised used for?
Laboratory chemicals.
What is the melting point of Buffer solution pH 7 (phosphate) Traceable to NIST, Stabilised?
The melting point is No data available and the boiling point is No information available.