Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082)
- Product Form
- Substance
- Chemical Name
- Residues (petroleum), catalytic cracking, Heavy Fuel oil, [A complex combination of hydrocarbons produced as the residual fraction from the distillation of the products from a catalytic cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C11 and boiling above approximately 200 °C (392 °F).]
- Synonyms
- SLURRY BTS = FLUXANT ; HCO ; RESIDU CRAQUAGE CATALYTIQUE (RP) ; 92061-97-7
Regulatory Identifiers
- CAS Number
- 92061-97-7 Check regulations →
- EC Number
- 295-511-0 Check regulations →
- REACH No.
- TOTAL RAFFINAGE FRANCE (01-2119486485-25-0007) - TOTAL RAFFINADERIJ ANTWERPEN (01-2119486485-25-0005) - TOTAL LINDSEY OIL REFINERY (01-2119486485-25-0024)
Identified Uses
Manufacture of substances, Distribution of substance, Formulation & (re)packing of substances and mixtures, Intermediates, Coating, Road and construction applications, Use as a fuel.
Manufacturers & Suppliers
TOTAL PETROCHEMICALS & REFINING SA/NV
manufacturer
Rue de l'Industrie 52 Nijverheidsstraat - B-1040 BRUSSELS - BELGIUM
+32 (0)2.288.91.11
www.total.com
Emergency Contacts
Carechem 24 International
+44 (0) 1235 239 670
Carechem 24 International
+33 1 49 00 00 49
Carechem 24 International
+44 (0) 1235 239 671
Carechem 24 International
+86 10 5100 3039
Carechem 24 International
+65 3158 1074
National Poisons Emergency number
08 45 46 47
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
8am - 10pm, 7/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Residues (petroleum), catalytic cracking, Heavy Fuel oil, [A complex combination of hydrocarbons produced as the residual fraction from the distillation of the products from a catalytic cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C11 and boiling above approximately 200 °C (392 °F).]
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Residues (petroleum), catalytic cracking, Heavy Fuel oil, [A complex combination of hydrocarbons produced as the residual fraction from the distillation of the products from a catalytic cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C11 and boiling above approximately 200 °C (392 °F).] EC: 295-511-0 | 92061-97-7 | 100% | Yes |
| Hydrogen sulfide (traces) EC: 231-977-3 | 7783-06-4 | --- | Yes |
Notes
UVCB
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a physician immediately. If breathing is difficult, give oxygen. If breathing stops, give artificial respiration. Place under medical observation.
Remove/Take off immediately all contaminated clothing. Wash off immediately and plentifully with water for at least 20 minutes. Exposure to splashing of hot product: Treat the affected part with cold water (by spraying or immersion). Get medical advice/attention.
Immediately rinse with water for a prolonged period while holding the eyelids wide open. Consult an eye specialist.
Do not give anything to drink. Do not induce vomiting. Take immediately victim to hospital. If swallowed, rinse mouth with water (only if the person is conscious).
Immediate Medical Attention
Call a physician immediately. Get medical advice/attention. Consult an eye specialist. Take immediately victim to hospital.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
RESIDUES (PETROLEUM), ATMOSPHERIC (UN 3256)
CAS: 68333-22-2
RESIDUES (PETROLEUM), VACUUM
CAS: 64741-56-6
RESIDUES (PETROLEUM), ATMOSPHERIC
---
Distillates (petroleum), light catalytic cracked
CAS: 64741-59-9
Distillates (petroleum), light catalytic cracked
CAS: 64741-59-9
DISTILLATES (PETROLEUM), HEAVY HYDROCRACKED
CAS: 64741-76-0
NAPHTHA (PETROLEUM), CATALYTIC REFORMED
---
NAPHTHA (PETROLEUM), CATALYTIC REFORMED
CAS: 68955-35-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The substance is flammable and therefore the following conditions must be met to ensure safe use: Risks are controlled by storage and use under conditions which avoid all ignition sources. . Ensure adequate ventilation. Safety shower. Eye fountain.
hydrocarbons resistant gloves. In case of repeated or prolonged contact wear gloves. recommended material: fluorinated polymer. polyvinyl alcohol. Layer thickness : all thicknesses. Breakthrough time : > 480 min. EN 374-3. In the event of contact with the liquid: Nitrile rubber gloves. Layer thickness : > 0,30 mm. Breakthrough time : > 60 min. EN 374-3. Gloves may degrade in contact with this chemical. - Carefully check the glove for cracks or damage before reusing it, dispose of gloves where the penetration time is exceeded. The penetration time depends on temperature, glove material, thickness and construction. Penetration time is measured against EN 374 in laboratory conditions corresponding to permanent static contact and is not necessarily representative of the risk in the workplace. Contact the gloves' supplier for further information on the selection and resistance of gloves.
Safety glasses. Do not wear contact lenses
Gas mask A. Where exposure through inhalation may occur from use, respiratory protection equipment is recommended
Wear suitable protective clothing. Safety foot-wear
Avoid release to the environment. Assure that emissions are compliant with all applicable air pollution control regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
Packing instructions (ADR) : P001, IBC03, LP01, R001; Special packing provisions (ADR) : PP1; Mixed packing provisions (ADR) : MP19; Portable tank and bulk container instructions (ADR) : T4; Portable tank and bulk container special provisions (ADR) : TP1, TP29; Tank code (ADR) : LGBV; Vehicle for tank carriage : AT; Special provisions for carriage - Packages (ADR) : V12; Special provisions for carriage - Loading, unloading and handling (ADR) : CV13
Special provisions (IMDG) : 274, 335; Packing instructions (IMDG) : P001, LP01; Special packing provisions (IMDG) : PP1; IBC packing instructions (IMDG) : IBC03; Tank instructions (IMDG) : T4; Tank special provisions (IMDG) : TP2, TP29
PCA Excepted quantities (IATA) : E1; PCA Limited quantities (IATA) : Y964; PCA limited quantity max net quantity (IATA) : 30kgG; PCA packing instructions (IATA) : 964; PCA max net quantity (IATA) : 450L; CAO packing instructions (IATA) : 964; CAO max net quantity (IATA) : 450L
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082) known by?
RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082) is also known as: SLURRY BTS = FLUXANT ; HCO ; RESIDU CRAQUAGE CATALYTIQUE (RP) ; 92061-97-7
What is the hazard signal word for RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082)?
The signal word is danger.
What is the physical form of RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082)?
RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082) is a liquid appearing as viscous. with dark green. dark brown. black. color. It has hydrocarbon. odor.
What is the solubility of RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082)?
insoluble in water. Soluble in aromatic hydrocarbons. Aliphatic hydrocarbons.
What is RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082) used for?
Manufacture of substances, Distribution of substance, Formulation & (re)packing of substances and mixtures, Intermediates, Coating, Road and construction applications, Use as a fuel.
What are the hazard statements for RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082)?
This substance has 6 hazard statements:
- H332: Harmful if inhaled
- H350: May cause cancer
- H361d: Suspected of damaging the unborn child
- H373: May cause damage to organs through prolonged or repeated exposure
- H400: Very toxic to aquatic life
- H410: Very toxic to aquatic life with long lasting effects
What is the melting point of RESIDUES (PETROLEUM), CATALYTIC CRACKING (UN 3082)?
The melting point is No data available and the boiling point is 100 - 750 C.