NextSDS Logo
Safety Data Sheet EN

ETRO 4

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ETRO 4
Product Code
50842425

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Manufacture of lubricants (industrial and automotive), Used in off-shore drilling, Used as a component in the manufacture of explosives., Formulation of mixtures, Used as an intermediate, Use as binders and release agents

Manufacturers & Suppliers

P

Petronas Marketing (Netherlands) B.V.

national supplier

Rivium 1e Straat 42, 2909LE Capelle a/d Ijssel, The Netherlands

+31104337620

Emergency Contacts

Poisons information center of Ireland (for professionals) Dublin

+353 (0) 1 8092566

24 hours

Poison center Malaysia

+611800888099

Anti Gifcentrum Nederland

+31 30 274 88 88

National Poison Information Service

+44 (0) 844 892 0111

24 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed and enters airways.

Precautionary Statements

P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P331 Do NOT induce vomiting.
P405 Store locked up.
P501 Dispose of contents/container to qualified waste handlers in accordance with local regulation and national regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Distillates (petroleum), hydrotreated heavy paraffines EC: 265-157-1 64742-54-7 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Obtain medical attention if oil mist is inhaled. Remove casualty to a well-ventilated place.

Symptoms: pulmonary irritation

Skin contact

Remove contaminated clothing and contaminated equipment and dispose of safely. Wash the skin with plenty of water and soap.

Eye contact

Rinse immediately with plenty of water. If eye irritation, blurred vision or swelling occurs and persists, consult a specialist.

Symptoms: eye irritation, blurred vision or swelling

Ingestion

Never give anything by mouth to a convulsing or unconscious person. Do not induce vomiting. Seek professional medical attention or send the casualty to the hospital.

Symptoms: slight nausea and diarrhea

Immediate Medical Attention

Aspiration into the lungs can cause fatal pneumonitis.

Medical Treatment

Monitor breathing and pulse rate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, dry powder, carbon dioxide, inert gasses and sand and for smaller fires a fire blanket.

Unsuitable media

Water, direct water jets.

Specific hazards

Incomplete combustion can result in the production of carbon monoxide and possibly complex hydrocarbons.

Instructions

Do not use direct water jets.

Firefighter Protection

Wear self-contained breathing apparatus and full fire resistant protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear suitable protective equipment (including personal protective equipment referred to prevent any contamination of skin, eyes and personal clothing).

Small spill

Smaller spills can be cleaned up with absorbent material.

Large spill

Larger contained spills can be pumped to suitable recipients.

Environmental

In case of an accidental spill please keep the product contained as much as possible and prevent spillage into drains, prevent contamination with surface water and prevent seepage into the ground.

Cleanup methods

Collect free product with suitable means. Transfer product and other contaminated material used for the collection to suitable recipients for recycle, recovery or disposal.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid skin contact and inhalation of oil mist. Wear protective equipment when needed. Do not ingest.

Storage

Protect the product against direct sunlight and store in a dry and well-ventilated area. Do not store the product for longer periods of time at temperatures lower than the pour-point.

Hygiene

Do not eat, drink and smoke in work areas. Wash hands after use and remove contaminated clothing and protective equipment before entering eating areas.

Fire prevention

Prevent the buildup of static electricity and keep away from open fire or electrical discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation.

Hands

Chemical resistant protective gloves (EN 374).

Eyes

Tightly fitting safety goggles (EN166).

Respiratory

Oil mist: respirator (combined particle and organic vapor filter) (EN 529).

Skin/Body

Protective clothing (antistatic), splash-proof chemical protective clothing when required.

Environmental

Adequate loading/ unloading bays should be used where any spillage should be drained to dedicated tanks that are not directly linked to a sewage system. Collection of any spill should be done as quickly as possible.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
---
Freezing Point
---
Solubility In Water
Insoluble
Odor
---
Physical State
Liquid
Melting Point
---
Decomposition Temperature
No data
Vapor Density
---
Relative Density
---
Vapor Pressure
0.1 hPa
State Under Standard Conditions
---
Partition Coefficient
Log Kow >4
Ph
---
Density
0.835 g/ml
Solubility In Fat
---
Relative Evaporation Rate
---
Colour Intensity
---
Appearance
Bright and Clear Liquid
Evaporation Rate
---
Auto Ignition Temperature
No data
Dynamic Viscosity
---
Metal Corrosion
---
Solidification Point
---
Voc Content
---
Bulk Density
---
Lower Explosive Limit
No data
Physical State Data
liquid
Molecular Weight
---
Upper Explosive Limit
No data
Odor Threshold
---
Softening Point
---
Form
Liquid
Properties Status
---
Crystallisation Point
---
Boiling Point
330-500 °C
Flash Point
200-235 °C
Kinematic Viscosity
19.2 mm²/s
Solubility
Insoluble
Colour
Clear
Explosive Limits
---
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The shelf life of the product is shortened when exposed to excessive heat and direct sunlight. Keep in a dry and well-ventilated area. A nitrogen blanket is not required for tank storage.

Reactivity

The product is inert under normal conditions.

Hazardous reactions

No know reactions

Avoid

Avoid excessive heat and direct sunlight. Avoid storage below pourpoint.

Incompatible

Contact with strong oxidizing agents and strong acids should be avoided.

Decomposition

Incomplete combustion can result in the production of carbon monoxide and possibly complex hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Waste is to be considered and treated as hazardous waste according to 91/689/EEC.

Disposal

Dispose of contents/container to qualified waste handlers in accordance with local regulation and national regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ETRO 4?

The signal word is danger.

What is the physical form of ETRO 4?

ETRO 4 is a liquid appearing as bright and clear liquid with clear color.

What is the solubility of ETRO 4?

Insoluble

What is ETRO 4 used for?

Manufacture of lubricants (industrial and automotive), Used in off-shore drilling, Used as a component in the manufacture of explosives., Formulation of mixtures, Used as an intermediate, Use as binders and release agents

What are the hazard statements for ETRO 4?

This substance has 1 hazard statement:

  • H304: May be fatal if swallowed and enters airways.