NextSDS Logo
Safety Data Sheet EN

KER 828

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
KER 828

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Epoxy

Manufacturers & Suppliers

K

KUMHO P&B CHEMICALS

manufacturer

#218, Yeosu-Sandan 2ro, Yeosu-city Jeollanam-do, Korea

82-61-688-3682

K

KUMHO P&B CHEMICALS

distributor

East Wing 8F, SignitureTowers Seoul, 100 Cheonggyecheon-ro, jung-gu, Seoul,

82-2-6961-3464,3481

Emergency Contacts

KUMHO P&B CHEMICALS

82-61-688-3500

KUMHO P&B CHEMICALS

82-2-6961-1114

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aquatic Chronic Cat. 2
Eye Irrit. Cat. 2
Skin Sens. Cat. 1
Skin Irrit. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H411 Toxic to aquatic life with long lasting effects

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
P363 Wash contaminated clothing before reuse.
P391 Collect spillage.
P501 Dispose of contents/container in accordance with

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
4,4'-(1-methylethylidene)bisphenol polymer with (chloromethyl)oxirane 25068-38-6 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

When exposed to large amounts of steam and mist, move to fresh air. Take specific treatment if needed.

Skin contact

Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and Laundering enough contaminated clothing before reuse. Go to the hospital immediately if symptoms(flare, irritate) occur. Wash thoroughly after handling.

Symptoms: flare, irritate

Eye contact

Do not rub your eyes. Immediately flush eyes with plenty of water for at least 15 minutes and call a doctor/physician. Go to the hospital immediately if symptoms(flare, irritate) occur. Remove contact lenses if worn.

Symptoms: flare, irritate

Ingestion

About whether I should induce vomiting. Take the advice of a doctor. Rinse your mouth with water immediately.

Immediate Medical Attention

Go to the hospital immediately if symptoms(flare, irritate) occur.

Medical Treatment

Notify medical personnel of contaminated situations and have them take appropriate protective

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Unsuitable media

Avoid use of water jet for extinguishing

Specific hazards

Not available

Instructions

Move containers from fire area, if you can do without the risk. Keep unauthorized personnel out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of. Using a unattended and water devices in case of large fire and leave alone to burn if you do not imperative. Do not access if the tank on fire. Vapor or gas is burned at distant ignition sources can be spread quickly.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Move container to safe area from the leak area. Must work against the wind, let the upwind people to evacuate.

Small spill

sand or other non-combustible material, please let use absorption.

Large spill

Stay upwind and keep out of low areas. Dike for later disposal.

Environmental

Prevent runoff and contact with waterways, drains or sewers.

Cleanup methods

Wipe off the solvent.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with incompatible materials. Dealing only with a well-ventilated place. Do not handle until all safety precautions have been read and understood. Operators should wear antistatic footwear and clothing. Do not inhale the steam prolonged or repeated.

Storage

Save in cool, dry and well ventilated place. Avoid direct sunlight. Collected them in sealed containers. Store away from water and sewer.

Hygiene

Operators should wear antistatic footwear and clothing.

Fire prevention

No open fire. Prevent static electricity and keep away from combustible materials or heat sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

A system of local and/or general exhaust is recommended to keep employee exposures above the Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. The use of local exhaust ventilation is recommended to control emissions near the source.

Hands

Wear appropriate glove.

Eyes

Wear primary eye protection such as splash resistant safety goggles with a secondary protection face shield.

Respiratory

Under conditions of frequent use or heavy exposure, Respiratory protection may be needed. Respiratory protection is ranked in order from minimum to maximum. Consider warning properties before use. Any chemical cartridge respirator with organic vapor cartridge(s). Any chemical cartridge respirator with a full facepiece and organic vapor cartridge(s). Any air-purifying respirator with a full facepiece and an organic vapor canister. For Unknown Concentration or Immediately Dangerous to Life or Health: Any supplied-air respirator with full facepiece and operated in a pressure-demand or other positive-pressure mode in combination with a separate escape supply. Any self-contained breathing apparatus

Skin/Body

Wear appropriate glove.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
not available
Appearance
Liquid (Viscous liquid)
Explosive Limits
---
Kinematic Viscosity
---
Dynamic Viscosity
12-14 Pa.s at 25°C
Cloud Point
---
Odor
Slightly
Molecular Weight
not available
Vapor Density
not available
Freezing Point
not available
Colour Intensity
---
Colour
Clear (Pale yellow)
Form
Viscous liquid
Relative Density
1.16
Boiling Point
260 °C Excess
Solubility In Fat
---
Flammability
not available
Voc Content
---
Auto Ignition Temperature
not available
Decomposition Temperature
not available
Solubility In Water
---
Density
---
Vapor Pressure
< 0.1 mmHg at 25°C
Metal Corrosion
---
Odor Threshold
not available
State Under Standard Conditions
---
Partition Coefficient
not available
Physical State Data
liquid
Bulk Density
---
Upper Explosive Limit
not available
Physical State
Liquid (Viscous liquid)
Melting Point
not available
Solidification Point
---
Flash Point
259 °C Excess
Ph
not available
Evaporation Rate
not available
Softening Point
---
Crystallisation Point
---
Properties Status
---
Solubility
Negligible
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This material is stable under recommended storage and handling conditions.

Hazardous reactions

Hazardous Polymerization will not occur.

Avoid

Avoid contact with incompatible materials and condition.

Incompatible

Not available

Decomposition

Not available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Reduction or stabilization by incineration or similar process. Pre-process with water separation if possible. Water separation, incineration, evaporation and concentration, agglomeration and precipitation, separation, distillation, extraction, filtration, pyrolysis.

Disposal

Dispose by incineration. Incinerate the oil by separating the oil and water. The remainder of the water after separation will be processed in a water pollution prevention facilities.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

Local transport follows in accordance with Dangerous goods Safety Management Law. Package and transport follow in accordance with Department of Transportation (DOT) and other regulatory agency requirements.

IMDG

Local transport follows in accordance with Dangerous goods Safety Management Law. Package and transport follow in accordance with Department of Transportation (DOT) and other regulatory agency requirements.

IATA

Local transport follows in accordance with Dangerous goods Safety Management Law. Package and transport follow in accordance with Department of Transportation (DOT) and other regulatory agency requirements.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for KER 828?

The signal word is warning.

What is the physical form of KER 828?

KER 828 is a liquid (viscous liquid) appearing as liquid (viscous liquid) with clear (pale yellow) color. It has slightly odor.

What is the solubility of KER 828?

Negligible

What is KER 828 used for?

Epoxy

What are the hazard statements for KER 828?

This substance has 4 hazard statements:

  • H315: Causes skin irritation
  • H317: May cause an allergic skin reaction
  • H319: Causes serious eye irritation
  • H411: Toxic to aquatic life with long lasting effects

What is the melting point of KER 828?

The melting point is not available and the boiling point is 260 °C Excess.