NextSDS Logo
Safety Data Sheet EN

KER 828

CAS 1675-54-3

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
KER 828
Chemical Name
2,2 Bis(4'glycidyloxyphenyl) propane

Regulatory Identifiers

CAS Number
1675-54-3 Check regulations →

Identified Uses

For laboratory or industrial use only.

Manufacturers & Suppliers

T

Thames River Chemical Corp.

manufacturer

5230 Harvester Road Burlington, ON, CA, L7L 4X4

905-681-5353

Emergency Contacts

CHEMTREC

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aquatic Chronic Cat. 3
Eye Irrit. Cat. 2A
Skin Irrit. Cat. 2
Skin Sens. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H412 Harmful to aquatic life with long lasting effects

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 Wash/Wash hands thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water and soap.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see first-aid on the SDS).
P333 + P313 If skin irritation or a rash occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing. And wash it before reuse.
P501 Dispose of contents/container in accordance with local/national/international regulation. Waste management should be in full compliance with national, regional and local laws.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
BISPHENOL A DIGLYCIDYL ETHER 0001675-54-3 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove source of exposure or move person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER/doctor.

Skin contact

Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Take off contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Wash clothing before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If easy to do, remove contact lens, if worn. Protect unharmed eye. Keep eye wide open while rinsing. Do not rub eyes.

Ingestion

Rinse mouth with water. Please be advised by doctor whether induction of vomit is demanded or not.

Immediate Medical Attention

Get medical aid immediately.

Medical Treatment

If eye irritation persists, consult a specialist. If eye irritation persists: Get medical advice/attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical, foam or carbon dioxide.

Unsuitable media

Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards

In a fire or if heated, a pressure increase will occur and the container may burst.

Instructions

Isolate immediate hazard area and keep unauthorized personnel out. Move undamaged containers from immediate hazard area if it can be done safely.

Firefighter Protection

In case of fire, wear a full face positive-pressure self contained breathing apparatus and protective suit. Keep containers cool with water spray.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Small spill

add absorbent (soil may be used in the absence of other suitable materials) And use a non-sparking or explosion proof means to transfer material to a sealed, appropriate container for disposal.

Large spill

dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.

Environmental

Minimize contact of spilled material with soils to prevent runoff to surface waterways.

Cleanup methods

Sweep up and place in an appropriate closed container; Pick up and arrange disposal.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid direct or prolonged contact with skin and eyes. Avoid localized overheating. Vent drums while heating. Mix thoroughly to assure homogeneity. Wear appropriate personal protective equipment.

Storage

DO NOT ALLOW TO FREEZE. If freezing occurs, thaw and remix before using. Frozen material may be thawed in a warm room.

Hygiene

Do not smoke.

Fire prevention

Do not handle, store or open near an open flame, sources of heat or sources of ignition. Do not smoke.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Maintain air concentrations below occupational exposure levels and flammable limits. Use local explosion-proof exhaust ventilation for operations stoat produce a mist, vapour or fume. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value.

Hands

Use of gloves approved to relevant standards made from the following materials may provide suitable chemical protection: PVC, neoprene or nitrile rubber gloves. Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical resistance of glove material, glove thickness, dexterity. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Eyes

Wear safety glasses with side shields. Eye and face protection requirements will vary dependent upon work environment conditions and material handling practices. Appropriate ANSI Z87 approved equipment should be selected for the particular use intended for this material. Eye contact should be prevented through use of chemical safety glasses with side shields or splash proof googles.

Respiratory

Any chemical cartridge respirator with organic vapor cartridge. Any chemical cartridge respirator with a full facepiece and an organic vapor canister. For Unknown Concentration or Immediately Dangerous to life or health: Any supplied-air respirator with full facepiece and operated in a pressure-demand or other positive-pressure mode in combination with a separate escape supply. Any self-confined breathing apparatus with a full facepiece. If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker, a respiratory protection program that meets or is equivalent to OSHA 29 CFR 1910.134 should be followed.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Pale yellow viscous liquid
Colour
---
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
---
Melting Point
unapplied (liquid in room temperature)
Boiling Point
>200 °C
Flash Point
259 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
<0.01(at 20°C) Pa
Vapor Density
0.009 kg/m3 at 23°C
Relative Density
1.17
Bulk Density
---
Density
9.76 lb/gal
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
log Pow > 3 (n-octanol / Water standard)
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
12-14 Pa-s (at 25°C)
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage and handling conditions.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Heat, flames and sparks. Avoid contact with incompatible materials.

Incompatible

No Data Available

Decomposition

May emit flammable vapour if involved in fire.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

Titanium Oxide(TiO2): ErC50>100mg/l-72hr (green algae), EC50> 100mg/l-48hr (water flea), LC50>10,000mg/l-48hr (flathead minnow)

Toxicity

Ethanol,2-butoxy: EC50>1,000mg/l-48hr (daphnia magna), LC50-1,490mg/l-96hr (lepomis macrochirus)

Toxicity

2-Propanol, 1-methoxy-, 2-acetate: EC50>1,000MG/L-72hr (selenastrum capricomutum), EC50>500mg/l-48hr (daphnia magna, EC50 96h > 1,000mg/l (Selenastrum capricomutum), LC50 14d,6.5 mg/l (Oryzia latipes), LC50 161mg/l-96hr (Pimephales promelas)

Toxicity

Harmful to aquatic life with long lasting effects

Toxicity

Urea: Acute EC50 6573.1 mg/l Fresh water (Crustaceans-Ceriodaphniadubia-Neonate -48 hours, Acute EC503910000 mg/l Fresh water (Daphnia-Daphnia magna-Neonate) -48 hours, Acute LC50 22.5 ppt Fresh Water (Fish-Oreochromis) - 96 hours

Persistence and degradability

This product is biodegradable 93% (29d) Method: OECD 301D The product is readily biodegradable according to OECD criteria

Bioaccumulative Potential

Urea: LogPow < -1.73 (Potential low)

Mobility in Soil

Not volatile, Insoluble in water

Persistence and Degradability

Product is persistent and non-biodegradable but is unlikely to have any long term effect on the environment.

Bioaccumulative Potential

Non bioaccumulation or bio-magnification identified.

Other Adverse Effects

No data available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

It is the responsibility of the user of the product to determine at the time of disposal whether the product meets local criteria for hazardous waste.

Waste Codes

Ontario Class 211 Aromatic solvents and residues national code
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for KER 828?

The signal word is warning.

What is the physical form of KER 828?

KER 828 is a liquid appearing as pale yellow viscous liquid .

What is KER 828 used for?

For laboratory or industrial use only.

What are the hazard statements for KER 828?

This substance has 4 hazard statements:

  • H315: Causes skin irritation
  • H317: May cause an allergic skin reaction
  • H319: Causes serious eye irritation
  • H412: Harmful to aquatic life with long lasting effects

What is the melting point of KER 828?

The melting point is unapplied (liquid in room temperature) and the boiling point is >200 °C.