Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Feedstock FS 620Q
- Synonyms
- SIP Feedstock, White Mineral Oil
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- To Follow.
Identified Uses
Severely Hydrocracked / Hydrotreated white oil used as production feedstock
Manufacturers & Suppliers
SIP Ltd.
Westminster Tower, 3 Albert Embankment, London, SE1 7SP, United Kingdom
+44 (0) 20-7717-0100
Emergency Contacts
Emergency Contact
++44 (0)20-7717-0100
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| White Mineral Oil (petroleum) EC: 232-455-8 | 8042-47-5 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
remove to fresh air. Obtain medical advice if symptoms persist.
Symptoms: irritation to the nose or throat, or coughing
Wash skin thoroughly with soap and water after contact. Change contaminated clothing and dry-clean and launder before re-use.
Wash eyes thoroughly with copious quantities of water, ensuring eyelids are held open. Obtain medical advice if any pain or redness develops or persists.
Symptoms: pain or redness
If contamination of the mouth occurs, wash it out thoroughly with water. Obtain medical advice if large amounts are swallowed - do not induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry powder, foam, water fog or (for small fires) carbon dioxide
BCF/halon extinguishers
As with all mineral oil based products, this material is combustible.
Contain the spill and blanket with extinguishing agent. Use water spray to cool fire-exposed containers and as a protective screen.
Firefighter Protection
Fires in confined spaces should be dealt with by trained personnel wearing breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Large spillages must be notified to the appropriate authorities.
Contain and recover spillage by pumping or by using sand, sawdust or other suitable absorbents.
Materials: sand, sawdust or other suitable absorbents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Protective clothing, including impervious gloves
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use impervious gloves, Gloves (conforming to EN374). PVC is suitable for casual contact. If direct contact for more than 2 hours then Neoprene or nitrile gloves recommended.
Wear a face visor or goggles if eye contact can accidentally occur. In case of splashing use suitable eye protection such as glasses, goggles or a visor.
Avoid inhalation of mists, fumes or vapour generated during use.
Protective clothing should be worn if skin contact is anticipated. Avoid contact with skin and observe good personal hygiene. Change heavily contaminated clothing.
Take all precautions to avoid accidental spillage into soil or water. See Sections 6, 7, 12 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperatures.
Heat, combustion and other sources of ignition.
Avoid contact with strong oxidising agents.
Thermal decomposition can produce a variety of compounds, the precise nature of which will depend on the decomposition conditions. Incomplete combustion will generate smoke and hazardous gases, including carbon monoxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
incineration, land-fill or other suitable means approved by the Local Authority
Waste or surplus oil, or oil-contaminated materials, may be disposed of by incineration, land-fill or other suitable means approved by the Local Authority.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- White Mineral Oil
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material is not classified as dangerous for supply under current EC legislation. This material is not classified under current Canadian WHMIS legislation. This material is certified to meet the US Food and Drugs Administration (FDA) requirements for its intended use.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Feedstock FS 620Q known by?
Feedstock FS 620Q is also known as: SIP Feedstock, White Mineral Oil
What is the hazard signal word for Feedstock FS 620Q?
The signal word is no signal word.
What is the physical form of Feedstock FS 620Q?
Feedstock FS 620Q is a liquid appearing as colourless liquid . It has odourless odor.
What is Feedstock FS 620Q used for?
Severely Hydrocracked / Hydrotreated white oil used as production feedstock