CIMSTAR® 620FF

Move to fresh air in case of accidental inhalation of fumes from overheating or combustion.

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.

Symptoms: May cause slight irritation to the skin.

Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.

Symptoms: May cause slight irritation.

Rinse mouth. Do NOT induce vomiting. Drink promptly large quantities of milk, egg whites, gelatin solutions, or if these are not available, drink large quantities of water.

Symptoms: Ingestion may cause nausea and vomiting.

Any fire extinguishing media may be used on nearby fires (water, powder, foam).

Do not use a heavy water stream.

The product is not flammable.

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.

Spill area may be slippery. Wear recommended personal protective equipment. Equip cleanup crew with proper protection.

Prevent entry to sewers and public waters. Avoid release to the environment.

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Sweep or shovel spills into appropriate container for disposal.

Materials: inert solids, such as clay or diatomaceous earth

Handle in accordance with good industrial hygiene and safety practice.

Keep container closed when not in use. Keep at temperatures between 5°C and 35°C in original container.

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash contaminated clothing before reuse.

For most applications, normal shop ventilation is adequate. However, when high mist levels are generated or where machines are close together, or where ventilation is inadequate, use of splash guards or mist collectors is recommended. Mist levels should comply with local regulations.

Follow Cimcool Skin Protection Plan. Impervious gloves are recommended when handling product concentrate. The same gloves can be used for the diluted product, if considered necessary. Consider the particular working conditions under which the gloves are being used. Type: Disposable gloves, Reusable gloves; Material: Nitrile rubber (NBR); Permeation: 6 (>480 minutes); Thickness (mm): 0.11; Standard: EN ISO 374

Even though no specific eye irritation data are available, wear eye protection appropriate to conditions of use when handling this material. Type: Chemical goggles or safety glasses; Standard: EN 166

No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation.

Wear suitable protective clothing. Wash contaminated clothes

Stable under normal conditions.

None reasonably foreseeable.

None reasonably foreseeable.

Direct sunlight. Extremely high or low temperatures.

Incompatible with strong acids and oxidizing agents.

None under normal use. See Heading 5.