NextSDS Logo
Safety Data Sheet EN

Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan)

CAS 25103-58-6
EC 246-619-1

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan)
Product Code
10462848
Chemical Name
tert-Dodecaanthiol
Synonyms
tert-Dodecanethiol

Regulatory Identifiers

CAS Number
25103-58-6 Check regulations →
EC Number
246-619-1 Check regulations →
REACH No.
01-2119486132-42-0005

Identified Uses

Use as an intermediate

Manufacturers & Suppliers

Chevron Phillips Chemical Company LP logo

Chevron Phillips Chemical Company LP

manufacturer

10001 Six Pines Drive The Woodlands, TX 77380

www.CPChem.com

C

Chevron Phillips Chemicals International N.V.

distributor

Brusselsesteenweg 355 B-3090 Overijse Belgium

Emergency Contacts

Emergency Contact

866.442.9628

Emergency Contact

1.832.813.4984

CHEMTREC

800.424.9300

CHEMTREC

703.527.3887

CHEMCALL

+800 CHEMCALL (+800 2436 2255)

BIG

+32.14.584545

SOS-Cotec

0800.111.767

SOS-Cotec

+55.19.3467.1600

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Skin Sens. Cat. 1B H317
Eye Irrit. Cat. 2 H319
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/ eye protection/ face protection.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P391 Collect spillage.
P501 Dispose of contents/ container to an approved waste disposal plant.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixtures

Synonyms : TDM Molecular formula : C12H26S

Chemical Name CAS Number Concentration Hazardous
tert-Dodecaanthiol EC: 246-619-1 25103-58-6 90 - 100% Yes

For the full text of the R-phrases mentioned in this Section, see Section 16. For the full text of the H-Statements mentioned in this Section, see Section 16. For additional details, see the Exposure Scenario in the Annex portion

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.

Skin contact

If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.

Eye contact

Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Ingestion

Keep respiratory tract clear. If symptoms persist, call a physician. Take victim immediately to hospital.

Symptoms: Material may produce a serious, potentially fatal pneumonia if swallowed or vomited.

Immediate Medical Attention

If unconscious place in recovery position and seek medical advice. Take victim immediately to hospital.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Adequate ventilation to control airborned concentrations below the exposure guidelines/limits. Consider the potential hazards of this material (see Section 2), applicable exposure limits, job activities, and other substances in the work place when designing engineering controls and selecting personal protective equipment. If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the personal protective equipment listed below is recommended. The user should read and understand all instructions and limitations supplied with the equipment since protection is usually provided for a limited time or under certain circumstances.

Hands

The suitability for a specific workplace should be discussed with the producers of the protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Eyes

Eye wash bottle with pure water. Tightly fitting safety goggles. Wear face-shield and protective suit for abnormal processing problems.

Respiratory

Wear a supplied-air NIOSH approved respirator unless ventilation or other engineering controls are adequate to maintain minimal oxygen content of 19.5% by volume under normal atmospheric pressure. Wear a NIOSH approved respirator that provides protection when working with this material if exposure to harmful levels of airborne material may occur, such as:. Air-Purifying Respirator for Dusts and Mists / P100. Use a positive pressure, air-supplying respirator if there is potential for uncontrolled release, exposure levels are not known, or other circumstances where air-purifying respirators may not provide adequate protection.

Skin/Body

Choose body protection according to the amount and concentration of the dangerous substance at the work place. Wear as appropriate:. Protective suit. Safety shoes.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Auto Ignition Temperature
198 - 230 C (388 - 446 F)
Explosive Limits
---
Flammability
---
Odor
Repulsive
Dynamic Viscosity
2,6 cP at 20 C (68 F)
Voc Content
---
Kinematic Viscosity
No data available
Solubility In Water
0,00393 mg/l
Form
---
Upper Explosive Limit
No data available
Properties Status
---
Physical State Data
liquid
Odor Threshold
---
Relative Evaporation Rate
---
Solidification Point
---
Relative Density
0,86, 16 C(61 F)
Decomposition Temperature
---
Solubility
---
Density
---
Boiling Point
233 C (451 F)
Bulk Density
---
Colour Intensity
---
Ph
Not applicable
Lower Explosive Limit
No data available
Vapor Density
---
Cloud Point
---
Appearance
---
Solubility In Fat
---
Softening Point
---
Freezing Point
---
Metal Corrosion
---
Physical State
Liquid
State Under Standard Conditions
---
Flash Point
98 - 110 C (208 - 230 F)
Vapor Pressure
4,00 Pa at 24 C (75 F)
Melting Point
---
Evaporation Rate
< 1
Molecular Weight
202,44 g/mol
Partition Coefficient
POW: 6,1
Colour
Colorless
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan) known by?

Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan) is also known as: tert-Dodecanethiol

What is the hazard signal word for Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan)?

The signal word is warning.

What is the physical form of Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan)?

Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan) is a liquid with colorless color. It has repulsive odor.

What is Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan) used for?

Use as an intermediate

What are the hazard statements for Sulfole 120 Mercaptan (tert-Dodecyl Mercaptan)?

This substance has 4 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H410: Very toxic to aquatic life with long lasting effects.

Compliance Scanner

Scan your compliance