Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Eastman(TM) 2-Ethylhexanol
- Product Code
- EAN 903608. 00175-00, P0017500, P0017501, P0017503, P0017505, P001750A, P001750B, E00175E1, E00175E2, E00175E3, E0017504, P0017506, P0017508
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solvent
Uses advised against
None known.
Manufacturers & Suppliers
Eastman Chemical Company
manufacturer
200 South Wilcox Drive, Kingsport TN 37660-5280
(423) 229-2000
Emergency Contacts
CHEMTREC
+1-800-424-9300
CHEMTREC
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substance name: 2EH
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-ethylhexanol | 104-76-7 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Treat symptomatically. If symptoms persist, call a physician.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Wash contaminated clothing before re-use. Get medical attention. Thoroughly clean shoes before reuse.
Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/ attention.
Seek medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry chemical, Water spray
Water may be ineffective. The product will float on water and can be reignited on surface water.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment.
Avoid release to the environment.
soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations (see section 13). After cleaning, flush away traces with water.
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of vapor or mist. Avoid contact with skin, eyes and clothing. Do not swallow. Ensure adequate ventilation. Wash thoroughly after handling.
Keep container closed when not in use. Store locked up.
Wash thoroughly after handling.
Keep away from fire (No Smoking). Keep away from fire, sparks and heated surfaces.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation.
Wear suitable gloves.
Wear safety glasses with side shields (or goggles). Face-shield Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded.
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Hazardous decomposition products formed under fire
Heat, flames and sparks.
Oxidizing agents
Carbon dioxide (CO2) Carbon monoxide (CO)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be avoided or minimized wherever possible. Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- COMBUSTIBLE LIQUID, N.O.S. (2-Ethyl Hexanol)
- Transport Class
- CBL
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Eastman(TM) 2-Ethylhexanol?
The signal word is warning.
What is the physical form of Eastman(TM) 2-Ethylhexanol?
Eastman(TM) 2-Ethylhexanol is a liquid appearing as liquid with colorless color. It has musty odor.
What is Eastman(TM) 2-Ethylhexanol used for?
Solvent
What are the hazard statements for Eastman(TM) 2-Ethylhexanol?
This substance has 5 hazard statements:
- H227: Combustible liquid.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of Eastman(TM) 2-Ethylhexanol?
The melting point is -76 - -70 °C and the boiling point is 184 °C.