Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Eastman(TM) Acetaldehyde
- Product Code
- 00160-00, P0016000, P0016001, E0016003, E0016002, E0016001
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 200-836-8 Check regulations →
Identified Uses
Chemical intermediate
Uses advised against
None known.
Manufacturers & Suppliers
Eastman Chemical Company
manufacturer
200 South Wilcox Drive, 37660-5147 Kingsport
+14232292000
http://www.EASTMAN.com
Emergency Contacts
NCEC
+44 (0)1235 239 670
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetaldehyde EC: 200-836-8 | 75-07-0 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Treat symptomatically. If symptoms persist, call a physician.
Symptoms: May cause respiratory irritation.
Wash off with soap and water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.
Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/ attention.
Symptoms: Causes serious eye irritation.
Seek medical advice.
Symptoms: Harmful if swallowed.
Immediate Medical Attention
If symptoms persist, call a physician. Get medical attention if symptoms occur. If eye irritation persists: Get medical advice/ attention. Seek medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical, Water spray
Water spray jet
Water may be ineffective.
Use water spray to cool unopened containers.
Firefighter Protection
Wear an approved positive pressure self-contained breathing apparatus in addition to standard fire fighting gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear appropriate personal protective equipment.
Avoid release to the environment.
soak up with non-combustible absorbent material and transfer to a container for disposal according to local / national regulations (see section 13). After cleaning, flush away traces with water.
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get in eyes. Avoid contact with skin, eyes and clothing. Do not swallow. Wash thoroughly after handling. Keep away from fire (No Smoking). Keep away from fire, sparks and heated surfaces. Do not use sparking tools.
Keep container closed when not in use. Store locked up.
Handle in accordance with good industrial hygiene and safety practice.
Keep away from fire (No Smoking). Keep away from fire, sparks and heated surfaces. Do not use sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Good general ventilation (typically 10 air changes per hour) should be sufficient to control airborne levels.
Wear suitable gloves.
Wear safety glasses with side shields (or goggles). Face-shield. Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded.
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable
Hazardous decomposition products formed under fire conditions.
Heat, flames and sparks.
Strong oxidizing agents
Carbon dioxide (CO2), Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1089
- Shipping Name
- ACETALDEHYDE
- Transport Class
- 3
- Packing Group
- I
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Eastman(TM) Acetaldehyde?
The signal word is danger.
What is the physical form of Eastman(TM) Acetaldehyde?
Eastman(TM) Acetaldehyde is a liquid with colourless color. It has pungent odor.
What is Eastman(TM) Acetaldehyde used for?
Chemical intermediate
What are the hazard statements for Eastman(TM) Acetaldehyde?
This substance has 6 hazard statements:
- H224: Extremely flammable liquid and vapour.
- H302: Harmful if swallowed.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H341: Suspected of causing genetic defects.
- H350: May cause cancer.
What is the melting point of Eastman(TM) Acetaldehyde?
The melting point is -123 °C and the boiling point is 21 °C.