NextSDS Logo
Da

Dantoin DCDMH

DANGER solid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Dantoin DCDMH

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Intermediate

Overview

Dantoin DCDMH commonly used intermediate.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Acute Tox. Category 4 H302
Skin Corr. Category 1C H314
Eye Dam. Category 1 H318
Skin Sens. Category 1 H317
Aquatic Acute Category 1 H400

GHS Hazard Pictograms & Safety Symbols

GHS05 GHS Hazard Pictogram: Corrosive hazard - Materials that can cause severe skin burns and eye damage

GHS05

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H302: Harmful if swallowed.
  • H314: Causes severe skin burns and eye damage.
  • H317: May cause an allergic skin reaction.
  • H400: Very toxic to aquatic life.

Precautionary Statements

  • P260: Do not breathe dust or mist.
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
  • P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
  • IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes.
  • P310: Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Lonza Ltd

undefined

๐Ÿ“

Muenchensteinerstrasse 38 CH-4002 Basel, Switzerland

๐ŸŒ

CH

๐Ÿ“ž

+41 61 316 81 11

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Lonza Ltd

๐Ÿ“ž

+41 61 313 94 94

๐ŸŒ

CH

๐Ÿ•’

24h

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

Substance

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
1,3-Dichloro-5,5-dimethylhydantoin
EC: 204-258-7
118-52-5 Not specified โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Move to fresh air. If breathing is irregular or stopped, administer artificial respiration. Give oxygen. First aider needs to protect himself. Call a physician immediately.

๐Ÿ–๏ธ Skin Contact

Take off all contaminated clothing immediately. After contact with skin, wash immediately with plenty of soap and water. Call a physician immediately.

๐Ÿ‘๏ธ Eye Contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician immediately.

๐Ÿฝ๏ธ Ingestion/Swallowing

Call a physician immediately. Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
solid
Critical Property
๐Ÿ“Š Physical State Data
solid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
off-white
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
powder
๐Ÿ‘ƒ Odor
slight, pungent
๐Ÿ“Š Odor Threshold
Not available
๐Ÿงช Ph
Not available
๐ŸงŠ Melting Point
131 - 134 C
Critical Property
๐Ÿ’จ Boiling Point
- 200 C
Critical Property
๐Ÿ”ฅ Flash Point
171 - 174 C
Critical Property
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not available
๐Ÿ’จ Vapor Pressure
0,087 Pa (25 C)
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
1,62 (24 C)
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
1,62 g/cm3 (24 C)
Critical Property
๐Ÿ”ฅ Flammability
The product is not flammable.
๐Ÿ“Š Upper Explosive Limit
Not available
๐Ÿ“Š Lower Explosive Limit
Not available
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
- 134 C
๐Ÿ“Š Decomposition Temperature
- 200 C
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
Not available
๐Ÿ“Š Solubility In Water
hydrolyses
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
197,02 g/mol
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿงค Hand Protection

Suitable material : Nitrile rubber. Break through time : > 480 min. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).

๐Ÿ‘๏ธ Eye Protection

Tightly fitting safety goggles

๐Ÿ˜ท Respiratory Protection

In the case of dust or aerosol formation use respirator with an approved filter. Half mask with a particle filter P2 (EN 143)

๐Ÿฆบ Skin/Body Protection

Choose body protection according to the amount and concentration of the dangerous substance at the work place. No special protective equipment required.

๐ŸŒ Environmental Exposure Controls

Do not flush into surface water or sanitary sewer system.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

3085

๐Ÿ“ฆ Proper Shipping Name

Oxidizing solid, corrosive, n.o.s. (1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione)

โš ๏ธ Transport Hazard Class

5.1

๐Ÿ“‹ Packing Group

III

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Dantoin DCDMH?

The signal word for this substance is "danger".

What is the physical form of Dantoin DCDMH?

Dantoin DCDMH is a solid with off-white color. It has slight, pungent odor.

What is Dantoin DCDMH used for?

Intermediate

What are the hazard statements for Dantoin DCDMH?

This substance has 4 hazard statements: H302: Harmful if swallowed. H314: Causes severe skin burns and eye damage. H317: May cause an allergic skin reaction. H400: Very toxic to aquatic life.

What is the melting point of Dantoin DCDMH?

The melting point is 131 - 134 C and the boiling point is - 200 C.