Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DOW CORNING(R) 2-0408 INT DIMETHYL CYCLICS
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119529238-36
Identified Uses
Intermediates
Uses advised against
None known.
Manufacturers & Suppliers
Dow Corning Europe S.A.
manufacturer
rue Jules Bordet - Parc Industriel - Zone C, B-7180 Seneffe, Belgium
Emergency Contacts
Dow Corning (Barry U.K. 24h)
+44 1446732350
24h
Dow Corning (Wiesbaden 24h)
+49 61122158
24h
Dow Corning (Seneffe 24h)
+32 64 888240
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Silicone
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Octamethylcyclotetrasiloxane EC: 209-136-7 | 556-67-2 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Obtain medical attention.
No first aid should be needed.
No first aid should be needed.
Obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
DOW CORNING(R) 200 FLUID, 60,000 CST.
---
DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND
---
DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND
---
DOW CORNING(R) 2-0410 INT. ME2 LINEARS - SPLITTER
---
DOWSIL™ R1-9331 Int
CAS: 70131-67-8
DOWSIL™ R1-9331 Int
CAS: 70131-67-8
DOWSIL™ 1200 OS Primer Clear
---
DOWSIL™ 550 Fluid
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation : Refer to Section 7.1
Gloves are not normally required.
Safety glasses should be worn.
Suitable respiratory protection should be worn if the product is used in large quantities, confined spaces or in other circumstances where the OEL may be approached or exceeded. Depending on the working conditions, wear a respiratory mask with filter(s) A or use a self-contained respirator. The choice of a filter type depends on the amount and type of chemical being handled in the workplace. Regarding filter characteristics, contact your respiratory protection supplier.
Protective equipment is not normally necessary.
Refer to section 6 and 12.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S.(Cyclopolydimethylsiloxane)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DOW CORNING(R) 2-0408 INT DIMETHYL CYCLICS?
The signal word is warning.
What is the physical form of DOW CORNING(R) 2-0408 INT DIMETHYL CYCLICS?
DOW CORNING(R) 2-0408 INT DIMETHYL CYCLICS is a liquid with colorless color.
What is DOW CORNING(R) 2-0408 INT DIMETHYL CYCLICS used for?
Intermediates
What are the hazard statements for DOW CORNING(R) 2-0408 INT DIMETHYL CYCLICS?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H361f: Suspected of damaging fertility.
- H413: May cause long lasting harmful effects to aquatic life.