Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DORF POWER S 3100
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Asphaltene Stabilizer/Dispersant. For RnD purpose only
Manufacturers & Suppliers
Dorf Ketal Chemicals (I) Pvt. Ltd.
manufacturer
Dorf Ketal Tower-2. Kanchpada Ramchandra Lane. Malad (W).Mumbai 64.
+91-22-28813654 / +91-22-28828374
ReachLaw Ltd
Vnrikinkuja 3, 02600 Espoo, Finland
+358(0) 9 412 3055
Emergency Contacts
CHEMTREC
+1 (703) 527-3887
CHEMTREC India
000-800-100-7141
DORF KETAL Emergency Control Room
+912265271001
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Solvent naphtha (petroleum), heavy arom (< 10% naphthalene) EC: 265-198-5 | 64742-94-5 | --- | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.
Immediately rinse with water. If skin irritation continues, consult a doctor. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Rinse opened eye for several minutes under running water. Then consult a doctor.
Wash out mouth with water. Drink plenty of water and provide fresh air. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately (after inhalation or swallowing). Show this safety data sheet to the doctor in attendance.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local exhaust ventilation or other engineering control to maintain airborne levels below exposure limit requirement or guldelines. If there are no applicable exposure limit requirement or guidelines, general ventilation should be sufficient for most operations. Local exhaust ventillation may be necessary for some operations.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Where there is potential for airborne exposures, wear NIOSH approved respiratory protection.
Protective work clothing
No further information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Packing Group
- III
Warning: Miscellaneous dangerous substances and articles.
Warning: Miscellaneous dangerous substances and articles.
Warning: Miscellaneous dangerous substances and articles.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DORF POWER S 3100?
The signal word is danger.
What is the physical form of DORF POWER S 3100?
DORF POWER S 3100 is a liquid appearing as clear with amber to dark amber color.
What is the solubility of DORF POWER S 3100?
No data available.
What is DORF POWER S 3100 used for?
Asphaltene Stabilizer/Dispersant. For RnD purpose only
What are the hazard statements for DORF POWER S 3100?
This substance has 4 hazard statements:
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of DORF POWER S 3100?
The melting point is No data available. and the boiling point is No data available.