Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- VIKING SAE 30
- Product Code
- 0781 309 0011, 0781 309 0012, 0781 309 0013, 0781 309 0014, 0781 309 0017, 0781 309 2001, 0781 309 2002, 0781 309 2003, 0781 309 2004
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), SU21 Consumer uses: Private households / general public / consumers, PC24 Lubricants, greases, release products, PROC18 General greasing /lubrication at high kinetic energy conditions, Technical function Lubricating agent, Application of the substance / the mixture Motor Oil
Manufacturers & Suppliers
VIKING GmbH
manufacturer
Hans Peter Stihl-Straße 5, A-6336 Langkampfen/Kufstein
+43(0)5372-6972-298
ANDREAS STIHL AG & Co. KG
manufacturer
Badstraße 115, D-71336 Waiblingen
+49(0)7151-26-3237
Emergency Contacts
Emergency Contact
+43(0) 5372-6972-338
09:00 - 17:00
Emergency Contact
+49-621-60-43333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral oil emulsive preparation of product-specific addition agents.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Highly refined mineral oil | --- | --- | No |
Highly refined mineral oil (IP 346 DMSO < 3%)
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Instantly wash with water and soap and rinse thoroughly.
Symptoms: Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
Do not induce vomiting. Rinse mouth. Give plenty of water to drink in small sips. Seek medical treatment.
Immediate Medical Attention
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water jet. Fight larger fires with water jet.
Water with a full water jet.
Can be released in case of fire: Carbon monoxide (CO)
Use water to keep fire exposed containers cool.
Firefighter Protection
Do not inhale explosion gases or combustion gases. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
Should larger amounts of liquid run out stem it and dispose it of.
Do not allow to enter drainage system, surface or ground water.
Absorb with liquid-binding material (sand, diatomite, universal binders) and disposal in suitable containers.
Materials: sand, diatomite, universal binders, acid binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid the formation of oil haze. Avoid contact with eyes and skin.
Keep away from heat and direct sunlight. Keep container tightly closed and store upright to prevent any run out of product.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Additional information about design of technical systems: No further data; see item 7.
Oil resistant gloves. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: In case of a layer thickness of 0.4 mm the penetration time is longer than 480 minutes. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact gloves made of the following materials are suitable: Nitrile rubber, NBR
Safety glasses recommended during refilling.
Use breathing protection only when aerosol or mist is formed.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known
No further relevant information available.
Avoid contact with strong oxidizing agents.
None in case of intended use and storage in compliance with instructions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product is suitable for processing by an approved recycling facility or can be disposed of at any government approved waste disposal facility. When storing used mineral oil products, ensure that the categories for waste oil and mixing instructions are observed. Delivery of waste oil only to officially authorized collectors.
The product is suitable for processing by an approved recycling facility or can be disposed of at any government approved waste disposal facility.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for VIKING SAE 30?
The signal word is no signal word.
What is the physical form of VIKING SAE 30?
VIKING SAE 30 is a fluid appearing as fluid, brown with brown color. It has mineral-oil-like odor.
What is VIKING SAE 30 used for?
SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), SU21 Consumer uses: Private households / general public / consumers, PC24 Lubricants, greases, release products, PROC18 General greasing /lubrication at high kinetic energy conditions, Technical function Lubricating agent, Application of the substance / the mixture Motor Oil
What is the melting point of VIKING SAE 30?
The melting point is Not determined and the boiling point is >300 °C.